Craftsman 875.19934 Lubrication, Lubricate, Recommended Lubricants, air motor here, Owners Manual

Owner's Manual

Lubrication

An in-line filter-regulator-lubricator (fig 1) is recommended as it increases tool life

and keeps the tool in sustained operation. The in-line lubricator should be regularly checked and filled with air tool oil. Proper adjustment of the in-line lubricator is performed by placing a sheet of paper next to the tools exhaust ports and holding the throttle open approximately 30 seconds. The lubricator is properly set when a light stain of oil collects on the paper.

Excessive amounts of oil should be avoided. In the event that it becomes

necessary to store the tool for an extended period of time (overnight, weekend, etc.), it should receive a generous amount of lubrication through the air inlet (Figure 3). The tool should be run for approximately 30 seconds to ensure oil has been evenly distributed throughout the tool. The tool should be stored in a clean and dry environment.

Lubricate

ENG-8

Model No. 875. f99340

Recommended Lubricants

Use air tool oil or any other high grade turbine oil containing moisture absorbent, rust inhibitors, metal wetting agents and an EP (extreme pressure) additive. See Figure 3 for location/air inlet.

air motor here.......,._

Figure 3

Owner's Manual Model No. 875. f99340

Exploded View Drawing

23

Parts List

ENG-9