Craftsman 900.37051 manual To Unfold Handle, Grasscatcher Assembly, To Install Grasscatcher

To Unfold Handle

Raise the handle section into place and secure by tightening the two knobs. See figure below.

WARNING: For your own safely DO NOT use this mower without either the Grasscatcher or Mulch Insert in operating position.

KnobsHandle

GRASSCATCHER ASSEMBLY

•Slide the grassbag onto the grasscalcher frame. (See Fig. A)

•The grassbag has attachment clips sewn around the bag opening.

•Attach the two top clips to the frame, then altach the side clips, and lastly the bottom clip. (See Fig. B)

•Refer to "To Install Grasscatcher" instruction before attaching to mower.

@ clip b

TO INSTALL GRASSCATCHER

•Reach down between the mower handle and raise the rear door to a vertical position. (See Fig. A)

•Remove the mulch insert. See page 10 To Remove Mulch Insert.

•Pick up the grasscatcher by the handle

and lower the grasseatcher between the lawnmower handles. Position the

grass- catcher hanger hooks on the metal rod under the rear door.

(See Fig. B).

•Release the rear door.

WARNING: Never operate the mower unless the hanger hooks on the grasscatcher are seated properly, and the rear discharge door rests firmly against the top of the grasscatcher.

KNOW YOUR MULCHING MOWER

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR MULCHING MOWER. Compare the illustrations with your mulching mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

These symbols may appear on your mulching mower or in literature supplied with the product. Learn and understand their meaning.

	DA	!
CAUTION	J"_""-"	DANGER,	KEEP HANDS
OR WARNING	I _,	AND	FEET AWAY

Grasscatcher

Door

Operator

Presence

Control

Switch

Height

Indicator

MEETS CPSC SAFETY REQUIREMENTS

Sears rotary walk-behind power lawn mowers conform to the safety standards of the American National Standards Institute and the US. Consumer Product Safety

Commission.

WARNING: The blade always turns when the motor is running.

Operator Presence Control Switch - Must be held to the handle to slad and run the motor. Release to stop the motor.

Door - Allows conversion from mulching or bagging operation.

Height Adjustment Control -- Allows for simple one touch height adjustmenl of all four wheels at one time.