CONTAINER MOUNTING (See Fig. 3)
1.Install one container to left side first. Install other container to right side.
NOTE: Left edge of right container should always overlap right edge of left container at center support.
2.Close cover and lock latch over center support tube. To lock and release latch, pull back on latch handle.
COVER
LATCH
HANDLES
\
CENTER
SUPPORT
TUBE
FIG. 3
DEFLECTOR SHIELD,
LOWER CHUTE = MOWER WITH
MOUNTING TAB (See Fig. 4)
. Raise and hold deflector shield in upright position.
2.Place slot in lower chute over mounting tab on mower
and position lower chute over mower opening as shown.
3.Hook rear latch into flange hole on back of mower.
4.Hook frontlatch into flan e hole on front of mower. CAUTION: Do not remove deflector
shield fromwhen mowerattaching. Raiselowerand chutehold and allow it to rest on chute while in
operation.
DEFLECTOR SHIELD
HINGE BRACKET
MOUNTING
TAB
FRONT
LATCH
