KNOW YOUR GRASS CATCHER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCHER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others. Save this manual for future reference.
The operation of any riding mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your riding mower or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.
COMPLETE BAGGER MUST BE IN PLACE BEFORE OPERATING MOWER
UNPACKING INSTRUCTIONS
•Remove all parts and packing materials from carton.
•Check carton contents against list. Be sure all parts are there.
PARTS IDENTIFICATION
CARTON CONTENTS:
(2) | Containers | (1) | Support Assembly | (1) | Drawbar |
(1) | Upper Chute | (1) | Cover Assembly | (1) | Deflector Guard |
(1) | Lower Chute | (1) | Counterweight | (1) | Deflector Guard |
(1) | Blade | (1) | Counterweight |
| Hardware |
|
|
| hardware | (1) | #7 Drill Bit |
COVER | SUPPORT |
ASSEMBLY | |
| FULL |
| BAG |
| INDICATOR |
. container replacement a recommended
only
. Use ed damag or whencracked
| . Replace |
|
|
| frequently |
|
|
| bag |
|
|
| . Check |
|
|
| detierioration |
|
|
| and |
|
|
| to wear |
|
|
| is properlyissubject |
|
|
| container |
|
|
| unless |
|
|
| mower |
|
|
| WARNINGoperate |
|
|
| Do not |
|
|
| WARNING |
|
|
| UPPER | CHUTE |
|
| LATCH |
| |
| CHUTE | LOWER | |
|
| ||
|
|
| CHUTE |
GRASS | DEFLECTOR |
|
|
CATCHER | GUARD |
|
|
CONTAINERS |
|
|
|
BLADE 
DRAWBAR
LOWER
CHUTE
ATTACHING
STRAPS COUNTERWEIGHT
COUNTERWEIGHT
HARDWARE
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the riding mower, in the operator's position.
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO RIDING MOWER:
•Depress clutch/brake pedal fully and set parking brake.
• Place gearshift/motion control lever in "NEUTRAL" position.
•Place attachment clutch in "DISENGAGED" position.
•Turn ignition key "OFF" and remove key.
•Make sure the blade and all moving parts have completely stopped.
•Disconnect spark plug wire from plug and place where it cannot come in contact with plug.
4
