SERVICE AND ADJUSTMENTS

TO ADJUST MOWER BLADE DRIVE BELT

(See Fig. 24)

Your tractor has been manufactured with the ability to readjust the mower blade drive belt to provide you with longer belt life.

With the engine off and the lift lever in the highest position, move clutch lever up slowly until resistance is felt. If distance from bottom of slot in dash to lift lever is greater than 4-1/2 inches, adjustment is necessary.

Lower the mower deck for easier access.

Removethe bolt, nut and D-shaped washers from rock shaft assembly.

Move extension spring from lower to upper end of slot in rock shaft assembly and install bolt, nut and the D- shaped washers (flat side of washers down)..

Tighten bolt and nut to secure the D-shaped washers (flat side down as shown)

TO REPLACE MOWER BLADE DRIVE BELT (See Figs. 24 and 25)

The mower blade drive belt may be replaced without tools, Park the tractor on level surface_ Engage parking brake_ For assistance, there is a belt installation guide decal on the mower housing.

BELT REMOVAL -

Place attachment clutch in "DISENGAGED" position. Move attachment lift lever forward to lower mower to its lowest position.

Roll belt off engine pulley

Pull belt off both mandrel pulley&

Spring belt guide away from idler pulley and pull belt off idler pulley_

Slide belt from under extension spring

BELT INSTALLATION -

Slide belt under extension spring,

Place belt around back side and in groove of both mandrel pulleys,

Spring idler belt guide down and place belt around rear side of idler pulley,

Roll belt over engine pulley,

Make sur e belt is in all pulley grooves and inside all belt guides,

IDLER BELT

BELT

ENGINE PULLEY

GUIDE

 

 

L,H,

MANDREL

EXTENSION

PRING

g,R,

MANDREL

ROCK SHAFT

/

SPRING

BRAKE

ROD

NUT

FIG. 24

BELTENGINE

GUIDESPULLEY

FIG, 25

2O

Page 20
Image 20
Craftsman 917.25736 owner manual Service and Adjustments, To Adjust Mower Blade Drive Belt, Belt Removal, Belt Installation

917.25736 specifications

The Craftsman 917.25736 is a standout model in the realm of lawn tractors, offering remarkable performance and versatility for homeowners with medium to large lawns. Engineered to provide an efficient mowing experience, this lawn tractor is perfect for those seeking both power and reliability.

One of the key features of the Craftsman 917.25736 is its robust engine. Equipped with a 19.5 HP Briggs & Stratton engine, this tractor offers ample power to tackle tough mowing tasks. The engine is designed for durability and efficiency, ensuring that users can depend on it for consistent performance season after season.

The cutting deck is another significant highlight of the Craftsman 917.25736. It boasts a 42-inch steel cutting deck that not only provides a wide cutting path but also enhances durability and effectiveness. The adjustable cutting height offers six different positions, allowing users to customize their mowing experience based on their lawn's specific needs.

In terms of technology, the Craftsman 917.25736 features a hydrostatic transmission that delivers smooth and seamless operation. This means users can easily control their speed without the need for manual gear shifting, making it more accessible for individuals of all skill levels. The tight turning radius also allows for better maneuverability around obstacles like trees and flower beds.

The comfort of the operator has not been overlooked in the design of the Craftsman 917.25736. It comes with a plush, high-back seat that provides ample support during long mowing sessions. Additionally, the steering wheel is ergonomically designed, making it easier to handle the tractor over extended periods.

For those concerned about the safety features, this model does not disappoint. The tractor comes with a safety ignition switch that prevents accidental starting, as well as automatic shut-off features that engage when the operator leaves the seat, enhancing its safety profile significantly.

Overall, the Craftsman 917.25736 combines powerful performance, user-friendly technology, and comfort, making it an ideal choice for homeowners looking to maintain their lawns efficiently. With its thoughtful design and reliable features, it stands as a testament to Craftsman’s commitment to quality and innovation in outdoor power equipment. Whether you are mowing a large expanse or navigating tight corners, the Craftsman 917.25736 aims to deliver a dependable and enjoyable mowing experience.