Craftsman 917.270732 owner manual Lubrication Chart, Eguseov,Cer

	MAINTENANCE SCHEDULE			_____		_/_j*'_
AS YOU COMPLETE				/__..._'_,		_'_ _'_._y
.EGUSEOV,CER						DATES
		li		////		IF
	Check Tire Pressure		_	_
	Brake	perati°n
T	Check Operator	Presence and
	Interlock Systems		V'
R	Check for Loose Fasteners		if		I##T	I_
T	Sharpen/Replace Mower Blades			_,		i# #
	Lubrication Chart

0Check Battery Level

R	Clean	Battery and Terminals		l# #
	Check	Transaxle Cooling		i/
	Adjust	Blade Belt(s) Tension		I_s
	Adjust Motion Odva Belt(s) Tension			_s
	Check Engine Oil Level		I_	ql_ !
	Change Engine Oil			I_t_,3	I_
E	Clean Air Filter
N	Clean Air Screen
G	Inspect Muffler/Spark Attester			I_
	Replace Oil Filter (If equipped)
E	Clean Engine Cooling Fins			V'_
	Replace Spark Plug			I_	Id#
	Replace Air Filter Paper Cartridge			,/,
	Replace Fuel Filter				I_

I - Change rnoroo_en whonoperatingundera heavy _ orin I'dghambienttemper-=dur_. S - If equ_oeq withad_u=tabLolystem.

2 ° SerVicem,o_eoftenwhen operating in difly or dustyconditions,		6	- Not requiredif equippedwith mainteNmce-lmebaifeq/.
3	- If equippQdwith oil filter,change oil ev=ryS0 hour=,	7	- Tighlonfrontaxte pivotbo_to 35 a -Ibe, maximum.
4	- Replace blades rno_eoifen when rno_ng in sandy soil		Do not ove_ghten,

GENERAL RECOMMENDATIONS

The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain tractor as instructed in this manual.

Some adjustments will need to be made periodically to properly maintain your tractor.

All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

•Once a year you should replace the

spark plug, clean or replace air filter, and check blades and belts for wear.

A new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last

longer.

BEFORE EACH USE

•Check engine oil level.

•Check brake operation.

•Check tire pressure.

•Check operator presence and interlock systems for proper operation.

•Check for loose fasteners.

LUBRICATION CHART

ZerkZerk

_)Front	Wheel
Beadng		Bearing Zerk
Zerk

(_SAE 30 or 10w30 MOTOR OIL

_)GENERAL PURPOSE GREASE

_)REFER TO Maintenance =ENGINE" SECTION

IMPORTANT: DO not oil or grease the pivot

points which have special nylon bearings. Viscous lubricants will attract dust and dirt that will shorten the life of the self-lubricat-

ing bearings. If you feel they must be lubricated, use only a dry, powdered graphite type lubricant sparingly.

16