_CAUTION: Before performing any service or adjustments:
•Depress clutch/brake pedal fully and set parking brake.
•Place motion control lever in neutral (N) position.
•Place attachment clutch in "DISENGAGED" position.
•Turn ignition key "OFF" and remove key.
•Make sure the blades and all moving parts have completely stopped.
•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
TRACTOR
TO REMOVE MOWER
Mower will be easier to remove from the right side of tractor.
•Place attachment clutch in "DISEN-
GAGED" position.
•Move attachment lift lever forward to lower mower to its lowest position.
•Roll belt off engine pulley.
•Remove small retainer spring, and lift clutch spring off pulley bolt.
•Remove large retainer spring, slide
collar off and push housing guide out of bracket.
•Disconnect
•Disconnect suspens0on arms from rear deck brackets by removing retainer springs.
•Disconnect front links from deck by re- moving retainer springs.
•Raise lift lever to raise suspension arms. Slide mower out from under trac-
tot.
IMPORTANT: If an attachment other than the mower deck is to be mounted on the tractor, remove the front links and hook
the clutch spring onto square hole in frame.
TO INSTALL MOWER
•Raise attachment lift lever to its high- est position.
•Slide mower under tractor with dis-
charge guard to right side of tractor.
Lower lift lever to its lowest position.
Install mower in reverse order of re- moval instructions.
Small Retainer Spring
- Square Hole
Pulley
Unk
Retainer Springs | ||
Collar | ||
(Both Sides) | ||
|
Housing
Large Retainer Bracket
Spring
22