TRAC1OR

Always observe safety rules when performing any maintenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See "TO ADJUST BRAKE" in the Service and Adjustments section of this manual).

TIRES

Maintain proper air pressure in all tires (See "PRODUCT SPECIFICATIONS" section of this manual).

Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may

cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. "Fire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are working properly. If your tractor does not function as described,

repair the problem immediately.

The engine should not start unless the

clutch/brake pedal is fully depressed and attachement clutch control is in

the disengaged position.

When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never

operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be

kept sharp. Replace bent or damaged blades.

BLADE REMOVAL

Raise mower to highest position to allow access to blades.

Remove hex bolt, lock washer and flat washer securing blade.

Install new or resharpened blade with

trailing edge up towards deck as shown.

IMPORTANT: To ensure proper assem-

bly, center hole in blade must align with star on mandrel assembly.

Reassemble hex bolt, _ock washer and flat washer in exact order as shown.

Tighten bolt securely (27-35 Ft. Lbs.

torque).

IMPORTANT: Blade bolt is Grade 8 he_

treated.

 

T,o_ "g =,_.... _..

Mandrel Assembl_

......

Center

_

H;le _

Lock Washe_'__

_.Star

_----Hex

Bolt (Grade L_

*A Grade 8 heat treated bolt can be ident'die_ by six lines on the bolt head.

TO SHARPEN BLADE

NOTE: We do not recommend sharpen

ing blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and eventual

damage to mower and engine.

The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will neec a 5/8" diameter steel bolt, pin, or a

cone balancer. (When using a cone balancer, follow the instructions

supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded

portion of the steel bolt or pin and hol_

the bolt or pin parallel with the grounc If blade is balanced, it should remain

in a horizontal position. If either end ( the blade moves downward, sharpen

the heavy end until the blade is balanced.

5/8" B_.

. - _ _

_._

_ aQe

BA'B'ERY

Your tractor has a battery charging system which is sufficient for normal use However, periodic charging of the batter

with an automotive charger will extend its life.

Keep battery bolts tight.

iand terminals clean. Keep small vent holes open.

19 " Recharge at 6-10 amperes for 1 hour

Page 19
Image 19
Craftsman 917.27086 manual Babery

917.27086 specifications

The Craftsman 917.27086 is a robust riding lawn mower designed for homeowners who value efficiency and power in maintaining their lawns. Known for its reliable performance, this machine combines durability with advanced features, making it a popular choice among gardening enthusiasts.

One of the standout features of the Craftsman 917.27086 is its powerful engine. Equipped with a reliable 21 horsepower Briggs & Stratton engine, this mower offers ample power to tackle even the toughest mowing tasks. The engine's reliability ensures consistent performance, allowing users to mow large areas without interruption. Its automatic transmission system allows for smooth speed adjustments, providing users with enhanced control and ease of operation.

The cutting deck of the 917.27086 is designed for optimal performance. With a 42-inch cutting width, it efficiently covers large areas in a single pass while maintaining a precise cut. The deck features a robust steel construction, ensuring durability and longevity. Additionally, the deck height can be easily adjusted, offering users the flexibility to choose the perfect cutting height for their lawns.

Maneuverability is another significant advantage of the Craftsman 917.27086. The mower's tight turning radius allows for easy navigation around obstacles, such as flower beds and trees, enabling users to achieve a clean, professional finish on their lawns. The comfortable, adjustable seat is designed for extended use, reducing fatigue during long mowing sessions.

In terms of technology, this mower incorporates a user-friendly dashboard with easy-to-read gauges and controls, providing real-time feedback on mower performance. The inclusion of LED headlights improves visibility during early morning or late evening mowing sessions, ensuring safety and productivity at all times.

Additionally, the 917.27086 supports optional attachments, such as baggers and mulchers, enhancing its versatility. This allows users to customize their mowing experience based on their lawn care needs, from collecting clippings to mulching for nutrient-rich soil.

Overall, the Craftsman 917.27086 combines power, performance, and versatility, making it an excellent investment for homeowners seeking a reliable riding mower for their lawn care needs. With its array of features and technologies, it stands out as a top contender in the market, catering to the demands of both casual users and serious gardeners alike.