TO REPLACE MOWER BLADE DRIVE BELT

The mower blade drive belt may be re- placed without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

1.Remove mower from tractor (See "TO REMOVE MOWER" in this section of

manual).

2.Work belt off both mandrel pulleys and idler pulleys.

3.Pull belt away from mower.

BELT INSTALLATION -

1.Work belt around both mandrel pulleys and idler pulleys

2.Make sure belt is in all pulley grooves and inside all belt guides.

3.Install mower (See "To Install Mower" in this section of this manual).

Mandrel

Idler Pulleys

2.Measure distance between brake oper- ating arm and nut "A" on brake rod.

3.If distance is other than 1-1/2", loosen

jam nut and turn nut "A" until distance becomes 1-1/2". Retighten jam nut against nut "A".

4.Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is neces- sary. Replace brake pads or contact a Sears or other qualified service center.

With Parking Brake "Engaged"

Arm

Pulley

TO CHECK AND ADJUST BRAKE

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxte.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

1.Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and engage parking brake.

2.Place gear shift lever in neutral (N)

position.

The rear wheels must lock and skid when you try to manually push the tractor for- ward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

1.Depress clutch/brake pedal all the way down and engage parking brake.

TO REPLACE MOTION DRIVE BELT

Park the tractor on level surface. Engage parking brake. For assistance, there is a

belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

1. Remove mower (See "TO REMOVE

MOWER" in this section of manual). NOTE: Observe entire motion drive belt

and position of all belt guides and keepers.

2.Remove belt from stationary idler and clutching idler.

3.Remove belt downward from around

engine pulley.

4.Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keepers.

5.Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

1.Carefully work new belt down between transaxte belt keepers and onto the input pulley.

2.Slide belt into the center span keeper.

3.Pull belt toward front of tractor and roll

around the top groove of engine pulley.

4.Install belt through stationary idler and clutching idler.

23

Page 23
Image 23
Craftsman 917.27339 owner manual Belt Installation, To Check and Adjust Brake, To Check Brake, Belt Removal

917.27339 specifications

The Craftsman 917.27339 is a versatile riding lawn mower designed for homeowners seeking efficiency and performance in lawn maintenance. This model boasts a robust build quality, making it a popular choice among gardening enthusiasts and professional landscapers alike.

One of the standout features of the Craftsman 917.27339 is its powerful 26-horsepower Kohler engine, providing ample power for tackling a variety of lawn sizes and terrains. The engine ensures reliable performance and longevity, making it suitable for both residential use and larger landscapes. The mower is equipped with a hydrostatic transmission, which allows for smooth speed transitions without the need for shifting gears, making it easy to maneuver around obstacles and varying terrains.

The cutting deck is another highlight of the Craftsman 917.27339. With a 54-inch cutting width, it is designed to efficiently handle large mowing areas, reducing the time required to complete lawn care tasks. The deck features a 12-gauge steel construction, which increases durability and allows for effective grass cutting and collection. The adjustable cutting height, ranging from 1.5 to 4 inches, provides users with flexibility, enabling them to achieve the desired lawn finish.

In terms of technology and user convenience, the Craftsman 917.27339 is equipped with an ergonomic seat and steering wheel, promoting comfort during extended use. The mower also features an easy-to-access control panel that provides essential information at a glance, including speed and fuel levels.

For those concerned about grass clippings, this model includes a rear discharge option, which helps to distribute clippings evenly across the lawn, promoting healthier grass growth. Additionally, the optional bag attachment allows for easy collection of clippings, keeping your yard neat and tidy.

The Craftsman 917.27339 stands out not only for its performance but also for its ease of maintenance. It features quick-change oil and air filters, allowing users to perform routine upkeep without hassle. With its combination of power, comfort, and cutting-edge features, the Craftsman 917.27339 is an ideal choice for anyone looking to maintain a beautiful, well-manicured lawn with minimal effort.