Engine Pulley

Clutching Idler

Stationary Idler /"

Center Span

Keeper

Transmission

Input Pulley/6

0

 

TRANSAXLE MOTION CONTROL LE-

VER NEUTRAL ADJUSTMENT

The motion control lever has been preset at the factory and adjustment should not be necessary.

1.Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

2.Start engine and move motion con- trol lever until tractor does not move forward or backward.

3.Hold motion control lever in that posi- tion and turn engine off.

4.While holding motion control lever in place, loosen the adjustment bolt.

5.Move motion control lever to the neu- tral (N) (lock gate) position.

6.Tighten adjustment bolt securely. NOTE: If additional clearance is needed

to get to adjustment bolt, move mower deck height to the lowest position.

After above adjustment is made, if the

tractor still creeps forward or backward while motion control lever is in neutral

position, follow these steps:

1.Loosen the adjustment bolt.

2.Move the motion control lever 1/4 to 1/2 inch in the direction it is trying to creep.

3.Tighten adjustment bolt securely.

4.Start engine and test.

5.If tractor still creeps, repeat above steps until satisfied.

MotionControl

Lock

Gate

/"

 

Adjustment

,-'

......,

Bolt

TRANSMISSION REMOVAL/

REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged

after reinstallation and before operating the tractor. See "PURGE TRANSMISSION" in

the Operation section of this manual.

TO ADJUST STEERING WHEEL ALIGN-

MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble with crossbars

horizontal. Tighten securely.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not

adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or

camber, contact a Sears or other qualified service center.

TO REMOVE WHEEL FOR REPAIRS

1.Block up axle securely.

2.Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key - Do not lose).

3.Repair tire and reassemble.

NOTE: On rear wheels only: align

grooves in rear wheel hub and axle. Insert square key.

4.Replace washers and snap retaining ring securely in axle groove.

5.Replace axle cover.

NOTE: To seal tire punctures and prevent

flat tires due to slow leaks, purchase and use tire sealant from Sears. Tire sealant

also prevents tire dry rot and corrosion.

Washers

Retaining Ring

Axle Cover

Square Key

......I_

'

(Rear Wheel

Only)

 

TO START ENGINE WITH A WEAK BAT- TERY

_WARNING: Lead-acid batteries gen-

erate explosive gases. Keep sparks, flame and smoking materials away from bat-

teries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BAT- TERY" in the MAINTENANCE section of

26this manual).

Page 26
Image 26
Craftsman 917.273401 owner manual Transaxle Motion Control LE VER Neutral Adjustment, Transmission Removal Replacement

917.273401 specifications

The Craftsman 917.273401 is a powerful and versatile lawn tractor designed to tackle a variety of landscaping tasks while providing users with a smooth and efficient mowing experience. This model combines robust construction with advanced technologies to meet the needs of homeowners and gardeners alike.

One of the standout features of the Craftsman 917.273401 is its reliable engine. Powered by a 20-horsepower Briggs & Stratton engine, this lawn tractor delivers ample power to handle thick grass and uneven terrain. The engine is designed for easy starts and dependable performance, ensuring users can rely on their mower season after season.

In terms of cutting capabilities, the Craftsman 917.273401 is equipped with a 42-inch cutting deck. This wide deck allows for efficient mowing over medium to large lawns, reducing the time it takes to cover ground. Moreover, the deck is adjustable, providing users with the flexibility to select different cutting heights, ranging from 1.5 to 4 inches. This feature is essential for achieving the desired lawn appearance and accommodating various grass types.

The tractor's transmission system is another highlight, featuring a hydrostatic transmission that offers smooth and effortless speed adjustments. This technology allows users to drive at their preferred pace without the need for manual gear shifting, making the mowing process more enjoyable and less strenuous.

Comfort and usability are prioritized in the Craftsman 917.273401, showcased by its ergonomic seating and user-friendly controls. The high-back seat reduces fatigue during long mowing sessions, while the easy-access dashboard ensures that all necessary controls are within reach. Additionally, the tractor is designed with a tight turning radius, enabling users to maneuver around obstacles and tight spaces with ease.

Furthermore, the Craftsman 917.273401 is compatible with various attachments and accessories, such as baggers, snow plows, and mulching kits. This versatility extends the lawn tractor's utility beyond mowing, allowing users to tackle different tasks throughout the year.

In summary, the Craftsman 917.273401 stands out in the realm of lawn maintenance with its powerful engine, adjustable cutting deck, hydrostatic transmission, and user-centric design. Whether you're mowing a suburban lawn or managing a larger property, this lawn tractor offers the features and performance necessary to achieve a well-groomed landscape with ease.