Craftsman 917.275632 manual Slope Sheet, To Remove Tractor From Carton, Keys, For Future Use

Models: 917.275632

1 52
Download 52 pages 19.18 Kb
Page 7
Image 7
Slope Sheet

Slope Sheet

 

Keys

For Future Use

(2) Keys

 

Your new tractor has been assembled at the factory.

When right or left hand is mentioned in this manual, it means when you are in the oper- ating position (seated behind the steering wheel).

TO REMOVE TRACTOR FROM

CARTON

UNPACK CARTON

1.Cut along dotted lines on all four pan- els of carton. Remove end panels and lay side panels flat.

2.Remove protective materials from trac- tor hood and grille.

IMPORTANT: Check for and remove any

staples in skid that may puncture tires where tractor is to roll off skid.

CHECK BATTERY

1.Lift hood to raised position.

NOTE: If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in Maintenance section of this manual for charging instruc- tions).

ADJUST SEAT

1.Raise seat and loosen adjustment knob.

2.Lower seat into operating position and sit in seat.

3.Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

4.Get off seat without moving its ad- justed position.

5.Raise seat and tighten adjustment knob securely.

AdnJUl_tment__

NOTE: You may now roll or drive your

tractor off the skid. Follow the appropriate instruction below to remove the tractor

from the skid.

7

Page 7
Image 7
Craftsman 917.275632 manual Slope Sheet, To Remove Tractor From Carton, Keys, For Future Use, from the skid, Unpack Carton