3.Look down and behind before backing.

4.Move gear shift lever to reverse (R) po- sition and slowly release clutch/brake pedal to start movement.

5.When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" Position Engine "ON" Position ee (Normal Operating)

TO OPERATE ON HILLS

_,WARNING: Do not drive up or down hills with slopes greater than 15 ° and do not drive across any slope. Use the slope guide at the back of this manual.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If slowing is necessary, move throttle control lever to slower position.

•If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

•Move gearshift lever to 1st gear and range shift lever to low (L) position. Be sure you have allowed room for tractor to roll slightly as you restart movement.

•To restart movement, slowly release park- ing brake and clutch/brake pedal.

•Make all turns slowly.

TO TRANSPORT

•Raise attachment lift to highest position with attachment lift control.

•When pushing or towing your tractor, be sure gearshift lever is in neutral (N) position.

•Do not push or tow tractor at more than five (5) MPH.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are recom- mended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and

cause you to lose control of your tractor.

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil=

1.Check engine oil with tractor on level ground.

2.Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and screw cap tight, wait for a few seconds, re- move and read oil level. If necessary, add oil until "FULL" mark on dipstick is reached. Do not overfill.

•For cold weather operation you should change oil for easier starting (See the oil viscosity chart in the Maintenance section of this manual).

•To change engine oil, see the Mainte- nance section in this manual.

ADD GASOLINE

•Fill fuel tank to bottom of filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of

87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quan- tities that can be used within 30 days to assure fuel freshness.

_CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline near an open flame.

IMPORTANT: When operating in temper-

atures below32°F(0°C), use fresh, clean winter grade gasoline to help insure good cold weather starting.

CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separa- tion and formation of acids during storage. Acidic gas can damage the fuel system

of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for

additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

TO START ENGINE

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

1. Sit on seat in operating position,

13

Page 12 Page 14
Page 13
Image 13
Craftsman 917.27631 owner manual Before Starting the Engine, To Transport, Check Engine OIL Level
Page 12 Page 14

917.27631 specifications

The Craftsman 917.27631 is a robust lawn mower designed for homeowners who seek a reliable, efficient, and durable machine for maintaining their lawns. This mower features a powerful 21-inch cutting deck, making it capable of handling medium to large-sized yards with ease. One of its standout features is the 163cc gas engine, which provides ample power for tackling tough grass and uneven terrain while ensuring reliable starts and consistent performance.

The Craftsman 917.27631 is equipped with a self-propelled drive system, which allows users to navigate effortlessly through their lawns without the need for excessive physical strain. The variable speed control gives users the option to adjust the speed according to their preference and the terrain, ensuring optimal maneuverability. This feature is particularly beneficial for navigating around garden beds, trees, and other obstacles.

Another impressive aspect of the Craftsman 917.27631 is its 3-in-1 cutting capability. This versatile mower allows users to choose between mulching, bagging, or side discharge, providing flexibility based on preferences and conditions. The mulching capability promotes healthy lawn growth by returning finely chopped grass back to the soil, while the rear bagging option allows for easy collection of clippings for disposal or composting.

The mower also boasts an adjustable cutting height, which can be easily altered to ensure the perfect grass length for various seasons and grass types. Users can choose from multiple height settings, ensuring compatibility with different mowing needs. Moreover, the durable and lightweight construction of the Craftsman 917.27631 enhances its maneuverability and makes it easier to transport and store.

Safety features are paramount in the design of the Craftsman 917.27631. The engine will stop immediately when the operator releases the handle, preventing accidental injuries and promoting safe operation. Additionally, the ergonomic handle design adds comfort, reducing fatigue during prolonged use.

In summary, the Craftsman 917.27631 is a versatile, powerful, and easy-to-use lawn mower that caters to a wide array of lawn maintenance needs. With its self-propelling capabilities, adjustable cutting height, and efficient 3-in-1 cutting options, it represents a solid choice for any homeowner looking to maintain a pristine lawn with minimal effort.
Top Page Image Contents