Fully charge the battery for storage, Other

Immediately prepare your tractor for stor- age at the end of the season or if the trac-

_,wAWill not be used for 30 days or more. RNING: Never store the tractor

with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire tractor (See "CLEANING" in the Maintenance section of this manual).

2.Inspect and replace belts, if necessary (See belt replacement instructions in the Service and Adjustments section of this manual).

3.Lubricate as shown in the Maintenance section of this manual.

4.Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

5.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

•Fully charge the battery for storage.

•After a period of time in storage, battery may require recharging.

•To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected and battery cleaned thoroughly (see "TO

CLEAN BATTERY AND TERMINALS" in the Maintenance section of this manual).

•After cleaning, leave cables discon- nected and place cables where they cannot come in contact with battery terminals.

•If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel hose, or tank during storage. Also, alcohol blended fuels (called gasohol or using

ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can dam- age the fuel system of an engine while in storage.

•Empty the fuel tank by starting the en- gine and letting it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or stor- age container. Always follow the mix ratio found on stabilizer container. Run engine

at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carbure-

tor. Do not empty the gas tank and carbu- retor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in

the Maintenance section of this manual).

CYLINDER(S)

1.Remove spark plug(s).

2.Pour one ounce of oil through spark plug hole(s) into cylinder(s).

3.Turn ignition key to start position for a few seconds to distribute oil.

4.Replace with new spark plug(s).

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your tractor indoors

and cover it to give protection from dust and dirt.

•Cover your tractor with a suitable pro- tective cover that does not retain mois-

ture. Do not use plastic. Plastic cannot breathe which allows condensation to

form and will cause your tractor to rust.

IMPORTANT: Never cover tractor while engine and exhaust areas are still warm.

917.27631 specifications

The Craftsman 917.27631 is a robust lawn mower designed for homeowners who seek a reliable, efficient, and durable machine for maintaining their lawns. This mower features a powerful 21-inch cutting deck, making it capable of handling medium to large-sized yards with ease. One of its standout features is the 163cc gas engine, which provides ample power for tackling tough grass and uneven terrain while ensuring reliable starts and consistent performance.

The Craftsman 917.27631 is equipped with a self-propelled drive system, which allows users to navigate effortlessly through their lawns without the need for excessive physical strain. The variable speed control gives users the option to adjust the speed according to their preference and the terrain, ensuring optimal maneuverability. This feature is particularly beneficial for navigating around garden beds, trees, and other obstacles.

Another impressive aspect of the Craftsman 917.27631 is its 3-in-1 cutting capability. This versatile mower allows users to choose between mulching, bagging, or side discharge, providing flexibility based on preferences and conditions. The mulching capability promotes healthy lawn growth by returning finely chopped grass back to the soil, while the rear bagging option allows for easy collection of clippings for disposal or composting.

The mower also boasts an adjustable cutting height, which can be easily altered to ensure the perfect grass length for various seasons and grass types. Users can choose from multiple height settings, ensuring compatibility with different mowing needs. Moreover, the durable and lightweight construction of the Craftsman 917.27631 enhances its maneuverability and makes it easier to transport and store.

Safety features are paramount in the design of the Craftsman 917.27631. The engine will stop immediately when the operator releases the handle, preventing accidental injuries and promoting safe operation. Additionally, the ergonomic handle design adds comfort, reducing fatigue during prolonged use.

In summary, the Craftsman 917.27631 is a versatile, powerful, and easy-to-use lawn mower that caters to a wide array of lawn maintenance needs. With its self-propelling capabilities, adjustable cutting height, and efficient 3-in-1 cutting options, it represents a solid choice for any homeowner looking to maintain a pristine lawn with minimal effort.

Craftsman 917.27631 Fully charge the battery for storage, Fuel System, Engine OIL, Cylinders

Models: 917.27631