TO REMOVE WHEEL FOR REPAIRS

1.Block up axle securely.

2.Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key - Do not lose).

3.Repair tire and reassemble.

NOTE: On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

4.Replace washers and snap retaining ring securely in axle groove.

5.Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, purchase and usetire sealant from Sears. Tire sealant also prevents tire dry rot and corrosion.

Washers

Retaining

Rin(

Axle

Cover

Square

Key _

(Rear Whee_-Q_

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT

The motion control lever has been preset atthe factory; adjustment should not be necessary.

1.Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

2.Start engine and move motion control lever until tractor does not move forward

or backward.

3.Hold motion control lever in that position and turn engine off.

4.While holding motion control lever in place, loosen the adjustment bolt.

5.Move motion control lever to the neutral (lock gate) position.

6.Tighten adjustment bolt securely.

Motion Control

Neutral

Lever

Lock

 

Gate

Y

Adjustment Bolt

NOTE: If additional clearance is needed to

get to adjustment bolt, move mower deck height to the lowest position.

After above adjustment is made, if the trac- tor still creeps forward or backward while motion control lever is in neutral position, follow these steps:

1.Loosen the adjustment bolt.

2.Movethe motion control lever 1/4 to 1/2 inch in the direction it is trying to creep.

3.Tighten adjustment bolt securely.

4.Start engine and test.

5.If tractor still creeps, repeat above steps until satisfied.

TO START ENGINE WITH WEAK BATTERY

A_,WARNING: Lead-acid batteries gener-

ate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the

MAINTENANCE section of this manual).

If "jumper cables" are used for emergency starting, follow this procedure:

IMPORTANT: Your tractor is equipped with a 12 volt system. The other vehicle must also be a 12 volt system. Do not use your tractor battery to start other vehicles.

TO ATTACH JUMPER CABLES -

1.Connect one endofthe RED cable to the

POSITIVE (+) terminal of each battery(A-

B), taking care not to short against tractor chassis.

2.Connect one end of the BLACK cable

to the NEGATIVE (-) terminal (C) of fully charged battery.

3.Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER-

1.BLACK cable first from chassis and then from the fully charged battery.

2.RED cable last from both batteries.

Weak or

Fully

Dead

Charged

Battery

Battery

25

Page 25
Image 25
Craftsman 917.289243 manual To Remove Wheel for Repairs, Transaxle Motion Control Lever Neutral Adjustment

917.289243 specifications

The Craftsman 917.289243 is a versatile and robust lawn tractor designed to make yard care an easier and more efficient task. This model embodies the innovation and quality that Craftsman is known for, featuring various technologies and characteristics that enhance user experience and performance.

One of the standout features of the 917.289243 is its powerful engine. It is equipped with a reliable 21.5 HP Briggs & Stratton engine, which provides ample power to tackle demanding mowing jobs. The engine is complemented by a hydrostatic transmission, allowing for smooth speed control and effortless driving across varying terrains without the need for manual shifting.

The cutting deck of the Craftsman 917.289243 measures 42 inches, making it ideal for medium to large-sized lawns. With this cutting width, users can efficiently mow larger areas in less time. The deck also features a deck wash system, which simplifies maintenance by allowing users to easily clean the underside of the mower, ensuring optimal performance and longevity.

Maneuverability is another key characteristic of the Craftsman 917.289243. With a tight turning radius, this tractor can navigate around obstacles with ease, making it perfect for lawns with flowerbeds, trees, or other features. The comfortable seating and ergonomically designed controls further enhance the user experience, allowing for extended periods of use without discomfort.

One of the modern technologies integrated into this model is the automatic choke system, which simplifies starting in any weather condition. Additionally, the tractor's durable construction ensures that it can withstand the rigors of regular outdoor use, featuring a sturdy frame and durable components designed for longevity.

For those looking for versatility, the Craftsman 917.289243 also supports various attachments, such as baggers, mulchers, and snow plows, expanding its functionality throughout the year. This makes it not just a lawn mower, but a year-round outdoor tool that can adapt to different seasons and tasks.

In summary, the Craftsman 917.289243 lawn tractor combines power, efficiency, and user-friendly features, making it an excellent choice for homeowners who prioritize quality and performance in their lawn care equipment. With its reliable engine, versatile cutting options, and ease of use, this lawn tractor stands out as a premier option for those looking to maintain their lawns with precision and ease.