Craftsman 917.289362 owner manual Battery

Models: 917.289362

1 128
Download 128 pages 38.33 Kb
Page 82
Image 82

BATTERY

Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an au- tomotive charger wilt extend its life.

Keep battery and terminals clean. Keep battery bolts tight.

Keep small vent holes open.

Recharge at 6-10 amperes for 1 hour. NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS Corrosion and dirt on the battery and terminals can cause the battery to "leak" power.

1.Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor.

2.Rinsethe batterywith plain waterand dry.

3.Clean terminals and battery cable ends with wire brush until bright.

4.Coatterminals with grease or petroleum jelly.

5.Reinstall battery (See "REPLACING BATTERY" in the SERVICE AND AD- JUSTMENTS section of this manual).

TRANSAXLE COOLING

The transmission fan and cooling fins should be kept clean to ensure proper cooling.

Do not attempt to clean fan or transmission while engine is running or while the trans-

mission is hot. To prevent possible damage

to seals, do not use high pressure water or steam to clean transaxle.

inspect cooling fan to be sure fan blades are intact and clean.

*Inspect cooling fins for dirt, grass clippings and other materials. To prevent damage to seals, do not use compressed air or high pressure sprayer to clean cooling fins.

TRANSAXLE PUMP FLUID

The transaxle was sealed at the factory and fluid maintenance is not required for the life of the transaxte. Should the transaxle ever leak or require servicing, contact your nearest Sears or other qualified service center.

V-BELTS

Check V-belts for deterioration and wear after

100 hours of operation and replace if neces- sary. The belts are not adjustable. Replace belts if they begin to slip from wear.

ENGINE

LU BRICATION

Only use high quality detergent oil rated with API service classification SG-SL.

Select the oil'sSAE viscosity grade according to your expected operating temperature.

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, they will result in increased oil consumption when used above 32°R Check your engine oil level more frequent- ly to avoid possible engine damage from running low on oil.

Change the oil after every 50 hours of op- eration or at least once a year if the tractor

is not used for 50 hours in one year. Check the crankcase oil level before

starting the engine and after each eight

(8)hours of operation. Tighten oil fill cap/ dipstick securely each time you check the oil level.

TO CHANGE ENGINE OiL

Determine temperature range expected before oil change. All oil must meet API service classification SG-SL.

Be sure tractor is on level surface.

Oil will drain more freely when warm. Catch oil in a suitable container.

1.Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

2.Slide oil drain extension from the docking position on the engine blower housing and extend outward from engine.

Docking

Oil Drain

Position

 

Exten_.Cap

3.To open, twist cap counter-clockwise

4.After oil is drained completely, replace cap and twist clockwise until it stops.

18

Page 82
Image 82
Craftsman 917.289362 owner manual Battery

917.289362 specifications

The Craftsman 917.289362 is a robust and versatile lawn tractor that epitomizes the dedication to quality and functionality that Craftsman is well-known for. Designed for homeowners with medium to large yards, this lawn tractor stands out with its efficient performance and user-friendly features.

One of the main features of the Craftsman 917.289362 is its powerful engine. It is equipped with a 20 HP Briggs & Stratton engine that provides ample power to tackle various lawn care tasks. This reliable engine ensures smooth operation and quick starts, allowing users to mow their lawns effectively without hassles. The engine is paired with a hydrostatic transmission, which offers an effortless driving experience, enabling users to switch between speeds seamlessly without the need for manual gear shifting.

The cutting deck is another highlight of the Craftsman 917.289362. With a 42-inch deck size and a cutting height adjustment feature, this lawn tractor allows users to achieve a precise cut. The deck also comes with anti-scalp wheels, which prevent damage to the lawn and ensure even cutting across various terrains. The deck design also facilitates easy grass discharge or mulching, providing flexibility based on user preference.

Comfort is key when it comes to lawn maintenance, and the Craftsman 917.289362 does not disappoint. It features a high-back seat with adjustable settings to ensure maximum comfort during prolonged use. The ergonomic steering wheel design allows for easy maneuverability, making it simple to navigate around obstacles in the yard.

In terms of technology, this lawn tractor includes an advanced maintenance reminder system that alerts users when it's time for servicing. This feature ensures that the tractor remains in peak condition, thus prolonging its lifespan. Additionally, the tractor is designed with a cutting-edge air filtration system that enhances engine performance and efficiency, allowing for longer intervals between servicing.

Overall, the Craftsman 917.289362 is an excellent choice for homeowners looking for a dependable and efficient lawn tractor. Its combination of a powerful engine, user-friendly design, and advanced features makes it suitable for a variety of lawn care tasks, ensuring that users achieve a beautifully manicured lawn with ease. Whether you're mowing, hauling, or mulching, this lawn tractor delivers reliability and performance, making it a valuable addition to any outdoor toolkit.