TO REMOVE WHEEL FOR REPAIRS

1.Block up axle securely.

2.Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key - Do not lose).

3.Repair tire and reassemble.

NOTE: On rear wheels only: align grooves in rear wheel hub and axle. Insert square key.

4.Replace washers and snap retaining ring securely in axle groove.

5.Replace axle cover.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, purchase and use tire sealant from Sears. Tire sealant also

prevents tire dry rot and corrosion.

Washers

Retaining

Axle

Cover

Square

Key --____

(Rear Wheel Only)

TRANSAXLE MOTION CONTROL LEVER

NEUTRAL ADJUSTMENT

The motion control lever has been presetatthe factory; adjustment should not be necessary.

1.Loosen adjustment bolt in front of the right rear wheel, and lightly tighten.

2.Start engine and move motion control lever until tractor does not move forward or backward.

3.Hold motion control lever in that position and turn engine off.

4.While holding motion control lever in place, loosen the adjustment bolt.

5.Move motion control lever to the neutral (lock gate) position.

6.Tighten adjustment bolt securely.

Motion

Neutral

Lever

Lock

 

Gate

///

Adjustment Bolt

.... ,:

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

After above adjustment is made, if the trac- tor still creeps forward or backward while motion control lever is in neutral position,

follow these steps:

1.Loosen the adjustment bolt.

2.Movethe motion control lever 1/4 to 1/2 inch in the direction it is trying to creep.

3.Tighten adjustment bolt securely.

4.Start engine and test.

5.If tractor still creeps, repeat above steps until satisfied.

TO START ENGINE WiTH WEAK BATTERY

AI_,WARNING: Lead-acid batteries gener- ate explosive gases. Keep sparks, flame and smoking materials away from batteries.

Always wear eye protection when around batteries.

Ifyour battery is too weak to start the engine, it should be recharged. (See "BATTERY" in the MAINTENANCE section of this manual).

If "jumper cables" are used for emergency starting, follow this procedure: iMPORTANT: Your tractor is equipped with a 12 volt system. The other vehicle must also be a 12 volt system. Do not use your tractor battery to start other vehicles.

TO ATTACH JUMPER CABLES -

1.Connect one end of the RED cable to the

POSITIVE (+) terminal of each battery(A- B), taking care notto short against tractor chassis.

2.Connect one end of the BLACK cable

to the NEGATIVE (-)terminal (C) of fully charged battery.

Weak or

Fully

Dead

Charged

Battery

Battery

3.Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

1.BLACK cable first from chassis and then from the fully charged battery.

2.RED cable last from both batteries.

REPLACING BATTERY

_WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands,

rings, etc.

Positive terminal must be connected

first to prevent sparking from accidental grounding.

1.Lift hood to raised position.

2.Disconnect BLACK battery cable (A) then RED battery cable and carefully remove battery from tractor.

3.Install new battery with terminals in same position as old battery.

25

Page 89
Image 89
Craftsman 917.289362 owner manual To Remove Wheel for Repairs

917.289362 specifications

The Craftsman 917.289362 is a robust and versatile lawn tractor that epitomizes the dedication to quality and functionality that Craftsman is well-known for. Designed for homeowners with medium to large yards, this lawn tractor stands out with its efficient performance and user-friendly features.

One of the main features of the Craftsman 917.289362 is its powerful engine. It is equipped with a 20 HP Briggs & Stratton engine that provides ample power to tackle various lawn care tasks. This reliable engine ensures smooth operation and quick starts, allowing users to mow their lawns effectively without hassles. The engine is paired with a hydrostatic transmission, which offers an effortless driving experience, enabling users to switch between speeds seamlessly without the need for manual gear shifting.

The cutting deck is another highlight of the Craftsman 917.289362. With a 42-inch deck size and a cutting height adjustment feature, this lawn tractor allows users to achieve a precise cut. The deck also comes with anti-scalp wheels, which prevent damage to the lawn and ensure even cutting across various terrains. The deck design also facilitates easy grass discharge or mulching, providing flexibility based on user preference.

Comfort is key when it comes to lawn maintenance, and the Craftsman 917.289362 does not disappoint. It features a high-back seat with adjustable settings to ensure maximum comfort during prolonged use. The ergonomic steering wheel design allows for easy maneuverability, making it simple to navigate around obstacles in the yard.

In terms of technology, this lawn tractor includes an advanced maintenance reminder system that alerts users when it's time for servicing. This feature ensures that the tractor remains in peak condition, thus prolonging its lifespan. Additionally, the tractor is designed with a cutting-edge air filtration system that enhances engine performance and efficiency, allowing for longer intervals between servicing.

Overall, the Craftsman 917.289362 is an excellent choice for homeowners looking for a dependable and efficient lawn tractor. Its combination of a powerful engine, user-friendly design, and advanced features makes it suitable for a variety of lawn care tasks, ensuring that users achieve a beautifully manicured lawn with ease. Whether you're mowing, hauling, or mulching, this lawn tractor delivers reliability and performance, making it a valuable addition to any outdoor toolkit.