LAWN MOWER

Always observe safety rules when per- forming any maintenance.

TIRES

Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

DRIVE WHEELS

Check front drive wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash,

grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels.

If necessary to clean the drive wheels, be sure to clean both front wheels.

1.Remove hubcaps, Iocknuts & washers.

2.Remove wheels from wheel adjusters.

3.Remove any trash or grass cuttings from inside the dust cover, pinion and/ or drive wheel gear teeth.

4.Put wheels back in place.

NOTE: If after cleaning, the drive wheels do not turn freely, contact a Sears or other qualified service center.

BLADE CARE

For best results, mower blade must be kept sharp. Replace a bent or damaged blade. A CAUTION: Use only a replacement blade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is haz- ardous, could damage your mower and void your warranty.

TO REMOVE BLADE

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and

mower housing to prevent blade from turning when removing blade bolt.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter- clockwise.

5.Remove blade and attaching hardware

(bolt, lock washer, hardened washer). NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE

1.Position the blade adapter on the en- gine crankshaft. Be sure key in adapter and crankshaft keyway are aligned.

2.Position blade on the blade adapter.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on blade adapter.

3.Be sure trailing edge of blade (opposite sharp edge) is up toward the engine.

4.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

5.Use block of wood between blade and

lawn mower housing and tighten the blade bolt, turning clockwise.

The recommended tightening torque is 35-40 ft. Ibs.

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual.

Blade adapter

Key

Crankshaft

Lockwasher

Blade

Blade

 

 

 

bolt

Hardened

_

'_

 

washer

Trailing/edge

retainer

TO SHARPEN BLADE

NOTE: We do not recommend sharp-

ening blade - but if you do, be sure the blade is balanced. An unbalanced blade

will cause eventual damage to lawn mower or engine.

The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with it.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

Center hole

5/8" bolt or pin

14Blade

Page 14
Image 14
Craftsman 917.374062 manual Lawn Mower, Drive Wheels

917.374062 specifications

The Craftsman 917.374062 is a versatile and robust lawn tractor that has gained favor among homeowners looking for a reliable machine to maintain their landscapes. This model combines performance reliability with user-friendly features, making it an ideal choice for those with medium to large-sized lawns.

One of the standout features of the Craftsman 917.374062 is its powerful engine. Equipped with a 19 horsepower Briggs & Stratton engine, it provides ample power for various mowing tasks. The engine is designed for efficiency, ensuring that users can tackle tough grass and uneven terrain without sacrificing performance. Its automatic transmission also allows for smooth shifts and easy operation, removing the need for manual gear changes and enhancing the user experience.

The cutting deck on the 917.374062 is another highlight. With a 42-inch cutting width, it allows for efficient mowing, reducing the number of passes required to cover large areas. The deck features a durable construction that is built to withstand the rigors of regular use, while the adjustable mowing heights provide versatility for different grass types and preferences.

In terms of technology, the Craftsman 917.374062 showcases an easy-to-use dashboard that includes essential indicators and controls, enabling operators to keep track of engine performance and make adjustments as needed without difficulty. The tractor includes a comfortable seat that provides support during extended mowing sessions, ensuring that users can operate it without experiencing fatigue.

Another commendable characteristic of this machine is its maneuverability. Designed with a tight turning radius, the Craftsman 917.374062 can easily navigate around obstacles, flower beds, and trees, making it suitable for yards with intricate landscaping. Additionally, its rugged tires provide optimal traction, enhancing stability on lawns that may be slightly uneven or hilly.

Maintaining the Craftsman 917.374062 is relatively easy, with accessible components designed for user convenience. Routine maintenance is simplified, allowing users to keep the tractor in top working condition without requiring specialized skills or tools.

Overall, the Craftsman 917.374062 is an efficient and reliable option for homeowners who demand a capable lawn tractor. Its powerful engine, cutting deck efficiency, comfortable design, and ease of use make it a worthy investment for maintaining a pristine lawn. Whether tackling thick grass or navigating complex yards, this tractor is built to deliver results.