Craftsman 917.374354 owner manual Lawn Mower, Drive Wheels

Models: 917.374354

1 48
Download 48 pages 14.25 Kb
Page 13
Image 13

LAWN MOWER

Always observe safety rules when per- forming any maintenance.

TIRES

Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

DRIVE WHEELS

Check rear drive wheels each time before you mow to be sure they move freely.

The wheels not turning freely means trash,

grass cuttings, etc. are in the drive wheel area and must be cleaned to free drive wheels.

If necessary to clean the drive wheels, be sure to clean both rear wheels.

5.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

6.Use block of wood between blade and

lawn mower housing and tighten the blade bolt, turning clockwise.

The recommended tightening torque is 35-40 ft. Ibs.

IMPORTANT: Blade bolt is heat treated. If bolt needs replacing, replace only with approved bolt shown in the Repair Parts section of this manual.

BLADE CARE

For best results, mower blade must be kept

sharp. Replace a bent or damaged blade. A CAUTION: Use only a replacement

blade approved by the manufacturer of your mower. Using a blade not approved by the manufacturer of your mower is haz- ardous, could damage your mower and void your warranty.

TO REMOVE BLADE

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and mower housing to prevent blade from

turning when removing blade bolt. NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter- clockwise.

5.Remove blade and attaching hardware (bolt, lock washer, hardened washer).

6.Remove debris shield.

NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE

1.Position blade adapter on engine crank- shaft. Be sure key in adapter and crank-

shaft keyway are aligned; and that drive belt is inside tabs of belt retainer.

2.Install debris shield.

3.Position blade on the blade adapter. IMPORTANT: To ensure proper assembly, center hole in blade must align with star on blade adapter.

4.Be sure the trailing edge of blade (oppo- site sharp edge) is up toward engine.

 

 

Belt

 

retainer

 

Trailing

edge

Blade adapter

 

 

 

Hardened

Debris shield

washer

 

Lockwasher

Blade

Blade

bolt

TO SHARPEN BLADE

NOTE: We do not recommend sharpening

blade - but if you do, be sure blade is bal- anced. An unbalanced blade will cause

eventual damage to mower or engine.

The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a

5/8" diameter steel bolt, pin, ora cone bal- ancer. (When using a cone balancer, follow instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

Center hole

5/8" bolt or pin

13Blade

Page 13
Image 13
Craftsman 917.374354 owner manual Lawn Mower, Drive Wheels

917.374354 specifications

The Craftsman 917.374354 is a robust lawn tractor designed for homeowners who demand durability, performance, and versatility in their lawn care equipment. Known for its powerful engine and user-friendly features, the 917.374354 is built to handle various yard tasks, making it an essential addition to your outdoor tool arsenal.

At the heart of the Craftsman 917.374354 is a reliable 22 HP Briggs & Stratton engine. This powerful engine offers high torque performance, ensuring efficient operation even in tougher mowing conditions. The hydrostatic transmission adds to its appeal by providing smooth and variable speed control, allowing users to easily adjust their pace based on terrain and grass height.

One of the standout features of the 917.374354 is its 42-inch cutting deck. This size strikes a balance between maneuverability and coverage, enabling the mower to easily navigate around garden beds, trees, and other obstacles while still covering a large area in a single pass. The cutting deck is designed with a three-blade system that ensures a clean, precise cut every time, contributing to a healthier lawn.

In terms of adaptability, the Craftsman 917.374354 offers a variety of cutting height settings. Homeowners can choose from multiple positions, ensuring they can achieve the ideal grass length for their lawn conditions. Whether you prefer a closely trimmed yard or a slightly longer look, the adjustable height feature provides the flexibility necessary for effective lawn maintenance.

Comfort and usability are further enhanced by the ergonomically designed dashboard and controls, which allow for effortless operation. The high back seat offers ample support, ensuring a relaxed experience during longer mowing sessions. This thoughtful design leads to improved productivity, as users can focus on the task at hand without discomfort.

Another notable characteristic of the Craftsman 917.374354 is its durability. Crafted from high-quality materials, this lawn tractor is built to withstand the rigors of regular use. The heavy-duty frame and reinforced cutting deck support its longevity, making it a worthwhile investment for those who prioritize reliability in their outdoor tools.

In conclusion, the Craftsman 917.374354 stands out in the competitive world of lawn tractors. With its powerful engine, smooth hydrostatic transmission, versatile cutting deck, adjustable height settings, and user-centric design, this lawn tractor is equipped to handle a variety of lawn care tasks efficiently and comfortably. Whether you're mowing, mulching, or even attaching accessories for snow removal, the Craftsman 917.374354 proves to be a versatile and dependable choice for maintaining your outdoor space.