Before Starting Engine

TO EMPTY GRASS CATCHER

1.Lift up on grass catcher using the frame handle.

2.Remove grass catcher with clippings from under lawn mower handle.

3.Empty clippings from bag using both frame handle and bag handle.

NOTE: Do not drag the bag when empty- ing; it will cause unnecessary wear.

Grass catcher frame

_i, CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline

near an open flame.

,A CAUTION: Alcohol blended fuels (called gasohol or using ethanol or metha- nol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Empty the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

ADD OIL

Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see "ENGINE" in the Maintenance section of this manual.

A CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muffler on startup.

1.Be sure lawnmower is level.

2.Remove oil dipstick from oil fill spout.

3.You receive a container of oil with the

unit. Slowly pour the entire container down the oil fill spout into the engine.

NOTE: Initial oi! fill requires only 18 oz. due to residual oil in engine from the manufacturers 100% quality testing. When changing oil you may need 20 oz.

4.Insert and tighten dipstick.

IMPORTANT:

• Check oil level before each use. Add oil

if needed. Fill to full line on dipstick. Change the oil after every 25 hours of operation or each season. You may need to change the oil more often

under dusty, dirty conditions. See "TO CHANGE ENGINE OIL" in the Mainte-

nance section of this manual.

ADD GASOLINE

Fill fuel tank to bottom of tank filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of

87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel fresh- Bess.

Gasoline filler cap

TO STOP ENGINE

•To stop engine, release operator pres- ence control bar.

TO START ENGINE

NOTE: Due to protective coatings on the engine, a small amount of smoke may be

present during the initial use of the product and should be considered normal.

NOTE: Your engine is equipped with an automatic choke system. No priming or choking is required before starting.

•To start engine, hold operator presence control bar down to the handle and pull starter handle quickly. Do not allow starter rope to snap back.

37639, 917.376393 specifications

The Craftsman 917.376393 and 917.37639 are robust riding mowers designed to meet the needs of homeowners looking for a reliable and efficient lawn care solution. These models stand out in the crowded market of garden maintenance tools thanks to their combination of performance, technology, and user-friendly features.

A key feature of the Craftsman 917.376393 and 917.37639 is their powerful engine. Both models are equipped with a reliable Briggs & Stratton engine, providing ample horsepower to tackle various terrains and grass types. This robust engine ensures efficient cutting, allowing users to maintain a neat lawn without unnecessary delays. The mowers’ cutting deck, measuring 42 inches, is designed for optimal maneuverability and precision. It allows users to easily navigate around landscaping features while still achieving a clean, even cut.

The cutting height can be adjusted, offering a range of settings from 1.5 to 4 inches. This versatility allows homeowners to customize their mowing experience based on grass type and desired lawn appearance. Moreover, the automatic transmission feature makes the mowers easy to operate, allowing users to achieve smooth transitions between speeds without the need for manual shifting.

Another notable technology featured in these models is the innovative deck wash system. This convenience simplifies maintenance by allowing the user to connect a water hose, enabling easy cleaning of the mower deck after use. Keeping the deck clean ensures optimal cutting performance and longevity of the mower.

Comfort and ergonomics are also prioritized in the design of the Craftsman 917.376393 and 917.37639. The seats are designed for maximum comfort, with ample padding and the ability to adjust to different user heights. Additionally, the steering is designed for ease of use, contributing to an overall enjoyable mowing experience.

Safety features are a critical aspect of these riding mowers. They come equipped with a brake pedal that includes a safety switch, ensuring that the engine turns off if the user leaves the seat while the blades are engaged. This feature provides peace of mind, especially in households with children or pets.

In summary, the Craftsman 917.376393 and 917.37639 offer a combination of power, versatility, and safety, making them ideal choices for homeowners seeking an efficient mowing solution. Their advanced technologies and user-friendly features ensure that maintaining a lush lawn is both effortless and enjoyable.

Craftsman 917.376393 manual Before Starting Engine

Models: 37639 917.376393

TO EMPTY GRASS CATCHER