ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent

gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose, or tank during storage. Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation

of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

Empty the fuel tank by starting the en- gine and letting it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or stor- age container. Always follow the mix ratio

found on stabilizer container. Run engine

at least 10 minutes after adding stabilizer to allow the stabilizer to reach the car-

buretor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual).

CYLINDER

1.Remove spark plug.

2.Pour one ounce (29 ml) of oil through spark plug hole into cylinder.

3.Pull starter handle slowly a few times to distribute oil.

4.Replace with new spark plug.

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your unit indoors and cover it to protect it from dust and dirt.

Cover your unit with a suitable protec- tive cover that does not retain moisture.

Do not use plastic. Plastic cannot breathe, which allows condensation to

form and will cause your unit to rust. IMPORTANT: Never cover mower while

engine and exhaust areas are still warm.

ACAUTION: Never store the lawn

mower with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TROUBLESHOOTING =See appropriate section in manual unless directed

to a Sears Parts & Repair Center.

PROBLEM

CAUSE

CORRECTION

Does not start

.

Dirty

air

filter.

 

 

2.

Out

of fue!.

 

 

 

 

3.

Stale

fuel.

 

 

 

 

4.

Water

in fuel.

 

 

5.

Spark

plug wire is

 

 

disconnected.

 

 

6.

Bad spark

 

plug.

 

7.

Loose

blade

or broken

 

 

blade

adapter.

 

8.

Control

bar

in released

 

 

position.

 

 

 

 

 

9.

Control

bar

defective.

 

10. Fuel valve lever (if so

 

 

equipped)

in OFF position.

 

11.

Weak

battery

(if equipped).

 

12. Disconnected

battery

 

 

connector

(if equipped).

 

13. Blown fuse (if equipped).

. Clean/replace air filter.

2.Fill fuel tank.

3.Empty fuel tank and refill tank with fresh, clean gasoline.

4.Empty fuel tank and refill tank with fresh, clean gasoline.

5.Connect wire to plug.

6.Replace spark plug.

7.Tighten blade bolt or replace blade adapter.

8.Depress control bar to handle.

9.Replace control bar.

10.Turn fuel valve lever to the ON position.

11.Charge battery.

12.Connect battery to engine.

13.Replace fuse.

18

Page 18
Image 18
Craftsman 917.376393 manual Other, Fuel System, Engine OIL, Cylinder

37639, 917.376393 specifications

The Craftsman 917.376393 and 917.37639 are robust riding mowers designed to meet the needs of homeowners looking for a reliable and efficient lawn care solution. These models stand out in the crowded market of garden maintenance tools thanks to their combination of performance, technology, and user-friendly features.

A key feature of the Craftsman 917.376393 and 917.37639 is their powerful engine. Both models are equipped with a reliable Briggs & Stratton engine, providing ample horsepower to tackle various terrains and grass types. This robust engine ensures efficient cutting, allowing users to maintain a neat lawn without unnecessary delays. The mowers’ cutting deck, measuring 42 inches, is designed for optimal maneuverability and precision. It allows users to easily navigate around landscaping features while still achieving a clean, even cut.

The cutting height can be adjusted, offering a range of settings from 1.5 to 4 inches. This versatility allows homeowners to customize their mowing experience based on grass type and desired lawn appearance. Moreover, the automatic transmission feature makes the mowers easy to operate, allowing users to achieve smooth transitions between speeds without the need for manual shifting.

Another notable technology featured in these models is the innovative deck wash system. This convenience simplifies maintenance by allowing the user to connect a water hose, enabling easy cleaning of the mower deck after use. Keeping the deck clean ensures optimal cutting performance and longevity of the mower.

Comfort and ergonomics are also prioritized in the design of the Craftsman 917.376393 and 917.37639. The seats are designed for maximum comfort, with ample padding and the ability to adjust to different user heights. Additionally, the steering is designed for ease of use, contributing to an overall enjoyable mowing experience.

Safety features are a critical aspect of these riding mowers. They come equipped with a brake pedal that includes a safety switch, ensuring that the engine turns off if the user leaves the seat while the blades are engaged. This feature provides peace of mind, especially in households with children or pets.

In summary, the Craftsman 917.376393 and 917.37639 offer a combination of power, versatility, and safety, making them ideal choices for homeowners seeking an efficient mowing solution. Their advanced technologies and user-friendly features ensure that maintaining a lush lawn is both effortless and enjoyable.