TO EMPTY GRASS CATCHER

1.Lift up on grass catcher using the frame handle.

2.Remove grass catcher with clippings from under lawn mower handle.

3.Empty clippings from bag using both frame handle and bag handle.

NOTE: Do not drag the bag when empty- ing; it will cause unnecessary wear.

Grass catcher frame

_i, CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline

near an open flame.

,A CAUTION: Alcohol blended fuels (called gasohol or using ethanol or metha- nol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Empty the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

BEFORE STARTING ENGINE

ADD OIL

Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see "ENGINE" in the Maintenance section of this manual.

A CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muffler on startup.

1.Be sure lawnmower is level.

2.Remove oil dipstick from oil fill spout.

3.You receive a container of oil with the

unit. Slowly pour the entire container down the oil fill spout into the engine.

NOTE: Initial oi! fill requires only 18 oz. due to residual oil in engine from the manufacturers 100% quality testing. When changing oil you may need 20 oz.

4.Insert and tighten dipstick.

IMPORTANT:

• Check oil level before each use. Add oil

if needed. Fill to full line on dipstick. Change the oil after every 25 hours of operation or each season. You may need to change the oil more often

under dusty, dirty conditions. See "TO CHANGE ENGINE OIL" in the Mainte-

nance section of this manual.

ADD GASOLINE

Fill fuel tank to bottom of tank filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of

87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel fresh- Bess.

Gasoline filler cap

TO STOP ENGINE

To stop engine, release operator pres- ence control bar.

TO START ENGINE

NOTE: Due to protective coatings on the engine, a small amount of smoke may be

present during the initial use of the product and should be considered normal.

NOTE: Your engine is equipped with an automatic choke system. No priming or choking is required before starting.

To start engine, hold operator presence control bar down to the handle and pull starter handle quickly. Do not allow starter rope to snap back.

10

Page 10
Image 10
Craftsman 917.376401 owner manual Before Starting Engine

37640, 917.376401 specifications

The Craftsman 37640,917.376401 is an innovative and versatile tool designed to meet the needs of both seasoned professionals and home DIY enthusiasts. The unit is part of Craftsman’s extensive range of high-quality tools that showcase durability, ease of use, and cutting-edge technology. Its design integrates functionality and ergonomics, making it not just a tool but a reliable partner in various projects.

One of the standout features of the Craftsman 37640 is its exceptional build quality. Crafted from high-grade materials, it promises longevity and resilience even under the most demanding conditions. The robust construction ensures that users can rely on the tool for consistent performance, whether in a workshop or on a job site.

Equipped with advanced technologies, the Craftsman 37640 boasts a powerful motor that delivers impressive torque and speed, allowing for efficient completion of tasks. This makes it ideal for a wide range of applications, from heavy-duty jobs to delicate tasks requiring precision. Users will appreciate the variable speed control that enables them to adjust the power output according to the specific requirements of the task at hand.

Another key characteristic of the Craftsman 37640 is its ergonomic design. The tool features a comfortable grip that minimizes fatigue during prolonged use, ensuring that users can work efficiently without compromising their comfort. The layout of the controls is intuitive, making it easy for users to operate the tool seamlessly.

Safety is a priority in the design of the Craftsman 37640. It comes equipped with built-in safety features that protect the user from accidents or injuries. The tool also includes an effective cooling system to prevent overheating during extended operation, further enhancing user safety.

The Craftsman 37640 is versatile, with compatibility for a wide assortment of attachments and accessories, enabling users to customize the tool for specific tasks. This adaptability makes it an invaluable addition to any toolbox, enhancing its utility across various applications.

In conclusion, the Craftsman 37640,917.376401 stands out as a premier choice for those seeking a reliable and high-performance tool. Its advanced technologies, ergonomic design, and robust construction make it suitable for a multitude of tasks, ensuring user satisfaction and impressive results every time. Whether for professional use or personal projects, this tool is designed to deliver excellence in performance and durability.