The operation of any lawn SAFETVG'ASSESmower can result in foreign

objects thrown into the eyes, which can result in severe

eye damage. Always wear safety glasses or eye shields while oper- ating your lawn mower or performing any adjustments or repairs. We recommend a standard safety glasses orwide vision safety mask worn over spectacles.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED

Engine speed was set at the factory for optimum performance. It is not adjustable.

ENGINE ZONE CONTROL

_k,CAUTION: Federal regulations require an engine control to be installed on this lawn mower in order to minimize the risk

of blade contact injury. Do not under

any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running.

•Your lawn mower is equipped with an operator presence control bar which requires the operator to be positioned behind the lawn mower handle to start

and operate the lawn mower.

DRIVE CONTROL

. Self-propelling is controlled by holding the operator presence control bar down to the handle and pulling either drive control lever rearward to the handle. The further toward the handle a lever is pulled, the faster the unit will travel.

. Forward motion will stop when either the operator presence control bar or a drive control lever are released. To stop forward motion without stopping engine, release a drive control lever only. Hold operator presence control bar down against handle to continue mowing without self-propelling.

handle to lift the front wheels off the ground while turning lawn mower.

DRIVE CONTROL ADJUSTMENT

Over time, the drive control system may become "loose", resulting in decreased speed. There is a turnbuckle on the drive

control housing to increase tension on the drive cable. Proceed as follows:

1.Turn unit off and disconnect spark plug wire from spark plug.

2.Rotate turnbuckle on drive control to increase drive speed.

3.Operate mower to test drive speed. Readjust as required.

4.If condition fails to improve after the above steps (forward speed remains the same), your drive belt is worn and should be replaced.

ustment

turnbuckle

TO ADJUST CUTTING HEIGHT

Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit

your requirements. Medium position is best for most lawns.

• To change cutting height, pull up on adjuster lever, move wheel up or down to suit your requirements and release adjuster lever. Be sure all wheels are in the same setting.

NOTE: Adjuster is properly positioned when lever inserts into hole in plate.

LEVER BACKWARD

TO LOWER MOWER

NOTE: If after releasing the drive control the mower will not roll backwards, push

LEVER FORWARD

Lever

the mower forward slightly to disengage drive wheels.

Operator presence control bar

Drive control levers

TO ENGAGE DRIVE CONTROL

DRIVE CONTROL DISENGAGED

TO RAISE MOWER

Plate

• To keep drive control engaged

when

8

turning corners, push down on

the

Page 7 Page 9
Page 8
Image 8
Craftsman 917.376543 manual HOW to USE Your Lawn Mower
Page 7 Page 9

917.376543 specifications

The Craftsman 917.376543 lawn mower represents an innovative blend of performance, durability, and user-friendly design, making it ideal for homeowners and landscape enthusiasts alike. Engineered with precision, this mower is part of the Craftsman family, known for its commitment to quality and reliability.

One of the standout features of the Craftsman 917.376543 is its powerful engine. Equipped with a robust 163cc engine, it delivers reliable power to tackle tough grass and uneven terrain. This engine is designed for optimal performance and fuel efficiency, ensuring that users can mow more extensive areas without frequent refueling.

The mower's cutting deck is another highlight, measuring 21 inches in width. This size is advantageous for both small and medium-sized yards, allowing for efficient mowing while still being maneuverable enough to navigate tight corners and obstacles. The deck is also made from durable materials that resist rust and corrosion, ensuring a long lifespan for the mower.

One of the essential technologies in the Craftsman 917.376543 is its adjustable cutting height feature. With six different height positions, users can easily customize their mowing experience to suit their lawn's specific needs. Whether you prefer a low, manicured appearance or a higher cut for a more natural look, the adjustable height makes it simple to achieve the desired results.

User comfort is prioritized in the design of this lawn mower. It comes equipped with a lightweight steel frame and ergonomic handlebars to reduce strain during operation. The mower also features a mulch, bag, and side discharge capability, offering versatility in grass disposal options. This multifunctionality makes it easy to meet diverse lawn care needs, whether that’s mulching for nutrients or bagging for a clean finish.

Moreover, the Craftsman 917.376543 boasts compact storage capabilities. Its foldable handlebars facilitate easy storage in your garage or shed, conserving valuable space when the mower is not in use.

In summary, the Craftsman 917.376543 lawn mower combines power, versatility, and ease of use, making it an excellent choice for those seeking an efficient lawn care solution. Its advanced features and thoughtful designs ensure that it stands up to the demands of routine mowing while also prioritizing user comfort. This model is a testament to Craftsman's dedication to producing high-quality lawn maintenance equipment designed for performance and longevity.
Top Page Image Contents