TO CLEANAIR FILTER

1.Remove cover.

2.Carefully remove cartridge.

3.Clean by gently tapping on a flat sur- face. If very dirty, replace cartridge.

ACAUTION: Petroleumsolvents, such as kerosene,are not to be used to clean cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurizedair to clean or dry cartridge.

4. Install cartridge,then replace cover.

Tab

Cartridge

Filter

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

SPARK PLUG

Replace spark plug at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in the "PRODUCT SPECIFIC- ATIONS" section of this manual.

CLEANING

IMPORTANT: For best performance, keep mower housing free of built-grass

and trash. Clean the underside of your mower after each use.

,ACAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

•Clean the underside of your lawn mower by scraping to remove build-up of grass and trash.

•Clean engine often to keep trash from accumulating. A clogged engine runs hotter and shortens engine life.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•We do not recommend using a garden hose to clean lawn mower unless the

electrical system, muffler, air filter and carburetor are covered to keep water

out. Water in engine can result in short- ened engine life.

WATER WASHOUT FEATURE

Your lawn mower is equipped with a fitting that allows quick and easy cleaning of the underside of the housing. To use this

feature, proceed as follows:

1. Move lawn mower to an area of cut grass or another hard surface.

NOTE: Water, grass and other debris will drain from beneath the mower housing during the washout process.

2.Remove grass catcher and discharge chute assembly from lawn mower.

3.Close mulcher door (if equipped).

4.Connect a garden hose to the fitting where shown.

IMPORTANT: Be sure the garden hose is not routed under the lawn mower housing or entangled in the wheels.

5.Turn on water supply and check for leaks at the fitting.

If no leaks are present, start engine (as described in the Operation section of this manual) and let engine run until the under- side of the lawn mower is clean.

A WARNING: Do not engage the drive system during the washout process.

6.Shut off the engine.

7.Shut off water supply and remove hose

from fitting.

CAUTION: Do not remove hose from

fitting while engine is running. Water in engine can result in shortened engine life.

8.Start engine (as described in the Op- eration section of this manual) and let engine run for a full minute to remove excess water from mower.

Hose

Fitting

CLEAN UNDER DRIVE COVER

Clean under drive cover at least twice a season. Scrape underside of cover with putty knife or similar tool to remove any build-up of trash or grass on underside

15of drive cover.

Page 14 Page 16
Page 15
Image 15
Craftsman 917.376543 manual Cleaning, Muffler, Spark Plug, Water Washout Feature, Clean Under Drive Cover
Page 14 Page 16

917.376543 specifications

The Craftsman 917.376543 lawn mower represents an innovative blend of performance, durability, and user-friendly design, making it ideal for homeowners and landscape enthusiasts alike. Engineered with precision, this mower is part of the Craftsman family, known for its commitment to quality and reliability.

One of the standout features of the Craftsman 917.376543 is its powerful engine. Equipped with a robust 163cc engine, it delivers reliable power to tackle tough grass and uneven terrain. This engine is designed for optimal performance and fuel efficiency, ensuring that users can mow more extensive areas without frequent refueling.

The mower's cutting deck is another highlight, measuring 21 inches in width. This size is advantageous for both small and medium-sized yards, allowing for efficient mowing while still being maneuverable enough to navigate tight corners and obstacles. The deck is also made from durable materials that resist rust and corrosion, ensuring a long lifespan for the mower.

One of the essential technologies in the Craftsman 917.376543 is its adjustable cutting height feature. With six different height positions, users can easily customize their mowing experience to suit their lawn's specific needs. Whether you prefer a low, manicured appearance or a higher cut for a more natural look, the adjustable height makes it simple to achieve the desired results.

User comfort is prioritized in the design of this lawn mower. It comes equipped with a lightweight steel frame and ergonomic handlebars to reduce strain during operation. The mower also features a mulch, bag, and side discharge capability, offering versatility in grass disposal options. This multifunctionality makes it easy to meet diverse lawn care needs, whether that’s mulching for nutrients or bagging for a clean finish.

Moreover, the Craftsman 917.376543 boasts compact storage capabilities. Its foldable handlebars facilitate easy storage in your garage or shed, conserving valuable space when the mower is not in use.

In summary, the Craftsman 917.376543 lawn mower combines power, versatility, and ease of use, making it an excellent choice for those seeking an efficient lawn care solution. Its advanced features and thoughtful designs ensure that it stands up to the demands of routine mowing while also prioritizing user comfort. This model is a testament to Craftsman's dedication to producing high-quality lawn maintenance equipment designed for performance and longevity.
Top Page Image Contents