Theseaccessories were available when this lawn mower was produced. They are also available at most Sears retail outlets and service centers. Most Sears stores can also
order repair parts for you, when you provide the model number of your lawn mower.
Some of these accessories may not apply to your lawn mower.
LAWN MOWER PERFORMANCE
CUPPING DEFLECTOR |
|
|
FOR REAR DISCHARGE LAWN MOWERS | MULCHER KITS | STABIMZER |
GRASS CATCHERS |
|
|
FOR | FOR |
|
REAR DISCHARGE | SIDE DISCHARGE |
|
LAWN MOWERS | GRASS CATCHERS |
|
LAWN MOWERS |
| |
|
| GAS CANS |
LAWN MOWER MAINTENANCE
| MUFFLERS | AIR RLTERS |
| SPARK PLUGS |
|
| % |
|
|
BELTS | BLADES | BLADE ADAPTERS | WHEELS | ENGINE OIL |
Read these instructions and this manual in its entirety before you attempt to assemble
or operate your new lawn mower. Your new lawn mower has been assembled at
the factory with the exception of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.
TO REMOVE LAWN MOWER FROM
CARTON
•Remove loose parts included with mower. .
•Cut down two end corners of carton and lay end panel down flat.
•Remove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle.
•Roll lawn mower out of carton and check carton thoroughly for additional loose parts.
HOW TO SET UP YOUR LAWN
MOWER
TO UNFOLD HANDLE
IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables.
•Raise handles until lower handle section locks into place in mowing position.
•Remove protective padding, raise upper handle section into place on lower handle and tighten both handle knobs.
•Remove handle padding holding
operator presence control bar to upper handle.
4
