Craftsman 917.77342 owner manual Handle, Engine Fuel System, Engineoil, Cylinder

Models: 917.77342

1 26
Download 26 pages 60.17 Kb
Page 14
Image 14

Immediately prepare your trimmer for storage at the end of the season or if the unit will not

be used for 30 days or more.

TRIMMER

When trimmer is to be stored for a period of time, clean it thoroughly,remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire trimmer (See "CLEANING" in the Maintenance section of this manual).

2.Lubricate as shown in the Maintenance section of this manual.

3.Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

4.Touch up all rusted or chipped paint

surfaces; sand lightly before painting.

HANDLE

You can fold your trimmer handle for storage.

Loosen handle knob enough to allow upper handle to be folded forward.

IMPORTANT: When folding the handle for

storage or transportation,be sure to fold the handle as shown or you may damage the control cables.

 

.. ;_.

 

Upper _

'_1

 

handle

_"...

! "_

,..".._

Handle knob

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose or tank during storage. Also, experience indicates that alcohol blended fuels ( called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

1.Drain the fuel tank.

2.Start the engine and let it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINEOIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual).

CYLINDER

1.Remove spark plug.

2.Pour one ounce (29 ml) of oil through spark plug hole into cylinder.

3.Pull starter handle slowly a few times to distribute oil.

4.Replace with new spark plug.

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your unit indoors and cover it to give protection from dust and dirt.

Cover your unit with a suitable protective cover that does not retain moisture. Do

not use plastic. Plastic cannot breathe which allows condensation to form and will

cause your unit to rust.

IMPORTANT: Never cover trimmer while engine and exhaust areas are still warm.

_,CAUTION: Never store the trimmer with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

14

Page 14
Image 14
Craftsman 917.77342 owner manual Handle, Engine Fuel System, Engineoil, Cylinder

917.77342 specifications

The Craftsman 917.77342 is a versatile, high-performance lawn tractor designed to handle a variety of outdoor tasks with ease. This model is engineered for those who require a reliable and efficient machine for yard maintenance, providing an ideal balance between functionality and user comfort.

One of the standout features of the 917.77342 is its robust 24 HP Briggs & Stratton engine. This powerful engine ensures consistent performance, making it capable of tackling demanding jobs, from mowing large lawns to hauling garden debris. The engine’s advanced design promotes fuel efficiency and reduces emissions, aligning with modern eco-friendly standards.

The cutting system of the Craftsman 917.77342 is another key highlight. It is equipped with a 42-inch cutting deck, which allows for a wide mowing path, minimizing the time spent on lawn care. The deck has three adjustable cutting heights, enabling users to customize their lawn cutting experience based on the season, grass type, and personal preference. The system also features a mulch kit option, which allows grass clippings to be finely chopped and returned to the soil as a natural fertilizer, promoting lawn health.

Comfort is crucial in long mowing sessions, and the Craftsman 917.77342 does not disappoint. It comes with an adjustable, high-back seat designed for optimal support and comfort during use. The ergonomic steering wheel provides smooth handling and maneuverability, making it easier to navigate around obstacles in your yard.

Additionally, the tractor incorporates an automated hydrostatic transmission. This technology allows for seamless acceleration and deceleration without the need for shifting gears, simplifying operation for all users.

For added convenience, the Craftsman 917.77342 features a built-in grass catcher and a front bumper that enhances durability. The easy-access controls keep essential functions at the operator’s fingertips, ensuring a user-friendly experience.

In conclusion, the Craftsman 917.77342 lawn tractor is a well-rounded solution for homeowners looking for efficiency and ease in lawn care. Its powerful engine, versatile cutting system, comfort features, and intelligent design make it an outstanding choice for any garden enthusiast. Whether you are maintaining a small lawn or navigating a large property, this tractor is equipped to meet your needs effectively.