Craftsman 917.77342 To Removetrimmer from Carton, Howto SET Upyourtrimmer, To Unfoldhandle

Read these instructions and this manual in its

entirety before you attempt to assemble or operate your new trimmer.

IMPORTANT: This trimmer is shipped WITHOUT OIL OR GASOLINE in the engine. Your new trimmer has been assembled at the

factory with the exception of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. To ensure safe and proper operation of your trimmer, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.

Loose Parts Packed Separately

Safety	20 oz.	Trimmer Lines
Goggles	Bottle of oil	(2) Sets
		(0,155 diameter
		x 18,75 inches long)

TO REMOVETRIMMER FROM CARTON

•Remove loose parts included with trimmer,

•Cut down two end corners of carton and lay end panel down flat.

•Remove all packing materials,

•Roll trimmer out of carton and check carton thoroughly for additional loose parts.

HOWTO SET UPYOURTRIMMER

TO UNFOLDHANDLE

IMPORTANT: Unfold handle carefully so as not to pinch or damage control cables.

1.Loosen handle knob enough to allow upper handle to be unfolded from the shipping position.

2.Raise upper handle section into place

on lower handle and tighten handle knob.

3.Remove handle padding holding

trimmer head control bar to upper handle.

Your trimmer handle can be adjusted for your trimming comfort. Refer to "Adjust

Handle" in the Service and Adjustment section of this manual.

::_ Upper handle

' "'-	:	Lift up
•	• L

Handle knob

Lower handle J

5