HAZARD

RISK OF INJURY OR PROPERTY DAMAGE

WHEN TRANSPORTING OR STORING

 

WHAT CAN HAPPEN

 

HOW TO PREVENT IT

• Fuel or oil can leak or spill and could

If pressure washer is equipped with a fuel

 

result in fire or breathing hazard, serious

 

shut-off valve, turn the valve to the off

 

injury or death can result. Fuel or oil

 

position before transporting to avoid fuel

 

leaks will damage carpet, paint or other

 

leaks. If pressure washer is not equipped

 

surfaces in vehicles or trailers.

 

with a fuel shut-off valve, drain the fuel

 

 

 

 

 

 

 

 

from tank before transporting. Only

 

 

 

 

 

 

 

 

transport fuel in an OSHA approved

 

 

 

 

 

 

 

 

container. Always place pressure washer

 

 

 

 

 

 

 

 

on a protective mat when transporting to

 

 

 

 

 

 

 

 

protect against damage to vehicle from

 

 

 

 

 

 

 

 

leaks. Remove pressure washer from

 

 

 

 

 

 

 

 

vehicle immediately upon arrival at your

 

 

 

 

 

 

 

 

destination.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HAZARD

 

 

 

 

 

 

 

 

RISK TO FLUID

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INJECTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WHAT CAN HAPPEN

 

HOW TO PREVENT IT

• Your washer operates at fluid pressures

Never place hands in front of nozzle.

 

and velocities high enough to penetrate

• Direct spray away from self and others.

 

human and animal flesh, which could

 

Make sure hose and fittings are tightened

 

result in amputation or other serious

 

 

and in good condition. Never hold onto the

 

injury. Leaks caused by loose fittings or

 

 

 

hose or fittings during operation.

 

worn or damaged hoses can result in

 

 

• Do not allow hose to contact muffler.

 

injection injuries. DO NOT TREAT FLUID

 

Never attach or remove wand or hose

 

INJECTION AS A SIMPLE CUT! See a

 

physician immediately!

 

fittings while system is pressurized.

 

 

 

• Injuries can result if system pressure is

To relieve system pressure, shut off

 

not reduced before attempting

 

engine, turn off water supply, and pull gun

 

maintenance or disassembly.

 

trigger until water stops flowing.

 

 

 

 

 

 

 

Use only hoses and accessories rated for

 

 

 

 

 

 

 

 

pressure higher than your pressure

 

 

 

 

 

 

 

 

washer's p.s.i.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HAZARD

 

 

 

 

 

 

 

 

 

RISK OF CHEMICAL BURN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WHAT CAN HAPPEN

 

 

 

 

 

 

HOW TO PREVENT IT

Use of acids, toxic or corrosive chemi- cals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death.

Do not use acids, gasoline, kerosene, or any other flammable materials in this product. Use only household detergents, cleaners and degreasers recommended for use in pressure washers.

Wear protective clothing to protect eyes and skin from contact with sprayed materials.

5- ENG

D30339

Page 5
Image 5
Craftsman D30339, 919.672180 owner manual Risk to Fluid Injection, Risk of Chemical Burn