Craftsman 919.722020 owner manual Glossary, Accessories Tools

GLOSSARY

Become familiar with these terms before operating the unit.

CFM: Cubic feet per minute.

SCFM: Standard cubic feet per minute; a unit of measure of air delivery.

PSIG: Pounds per square inch gauge; a unit of measure of pressure. Code Certification: Products that bear one or more of the following marks: UL, CUL, ETL, CETL, have been evaluated by OSHA certified independent safety laboratories and meet the applicable Underwriters Laboratories Standards for Safety. Cut-In Pressure: While the motor is off, air tank pressure drops as you continue to use your accessory.

When the tank pressure drops to a certain low level the motor will restart automatically. The low pressure at which the motor automatically restarts is called "cut-in" pressure. Cut-Out Pressure: When an air compressor is turned on and begins to run, air pressure in the air tank begins to build. It builds to a certain high pressure before the motor automatically shuts off, protecting your air tank from pressure higher than its capacity. The high pressure at which the motor shuts off is called "cut-out" pressure.

Branch Circuit: Circuit carrying electricity from electrical panel to outlet.

ACCESSORIES

This unit is capable of powering the following Accessories. The accessories are available through the current Power and Hand Tool Catalog or full-line Sears stores.

Accessories	Tools
• In Line Filter	• Inflator/Blow Gun
• In Line Oiler	• Air Brush
• In Line Regulator	• Multi-Purpose Spray Gun
• Tire Air Chuck	• Touch Up Spray Gun
• Quick Connector Sets	• Brad Nailer
(various sizes)	• Stapler
• Air Hose: 1/4", 3/8" OR 1/2" I.D. in	• Finish Nailer
various lengths	• Grease Gun
	• Engine Cleaning Gun
	• Liquid Siphon Transfer
	• Caulk Gun
	• Smaller Impact Wrenches
	• Smaller Ratchet Wrenches
	• Mini-Rotary Grinder/Polisher/Cutter

9- ENG D29495