Craftsman 919.724123 owner manual Service and Adjustments, To Replace or Clean Check Valve

Models: 919.724123

1 44
Download 44 pages 10.56 Kb
Page 17
Image 17

SERVICE AND ADJUSTMENTS

Unit cycles automatically

when power is on. When doing Maintenance, you may be exposed to voltage sources, compressed air or moving parts. Personal injuries can occur. Before performing any Maintenance or repair, unplug the compressor and bleed off all air pressure.

ALL MAINTENANCE AND REPAIR OPERATIONS NOT LISTED MUST BE PERFORMED BY TRAINED SERVICE TECHNICIAN.

To Replace or Clean Check

Valve

1.Release all air pressure from air tank. See "To Drain Tank" in the Maintenance section.

2.Unplug outfit.

3.Loosen the nut on the outlet tube and move the outlet tube to the side.

Outlet Tube

Nut

Check

Valve

4.Unscrew the check valve (turn counterclockwise) using a socket wrench.

5.Make sure the valve disc moves freely inside the check valve and the spring holds the disc in the upper, closed position. The check valve may be cleaned with a solvent, such as paint and varnish remover.

Screwdriver

In open position nothing is visible.

In closed position disc is visible.

6.Apply sealant to the check valve threads. Reinstall the check valve (turn clockwise).

7.Replace the outlet tube and tighten the nut.

8.Perform the Break-in Procedure. See "Break-in Procedure" in the Operation section.

17- ENG

A14083

Page 17
Image 17
Craftsman 919.724123 owner manual Service and Adjustments, To Replace or Clean Check Valve, Outlet Tube Nut Check Valve