Craftsman 919.724123 owner manual Specification Chart, Safety Guidelines Definitions

SPECIFICATION CHART
Model No.	919-724123
Running HP	1.5
Bore	1-7/8"
Stroke	1-1/4"
Voltage-Single Phase	120
Minimum Branch Circuit Requirement	15 amps
Fuse Type	Time Delay
SCFM @ 40 psig	4.9
SCFM @ 90 psig	3.5

Refer to Glossary for abbreviations.

SAFETY GUIDELINES - DEFINITIONS

This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these sections.

	Indicates an			Indicates a potentially
	imminently hazardous			hazardous situation
situation which, if not avoided, will		which, if not avoided, may result in
result in death or serious injury.		minor or moderate injury.
	Indicates a potentially			Used without the
	hazardous situation			safety alert symbol
which, if not avoided, could result in			indicates a potentially hazardous
death or serious injury.			situation which, if not avoided, may
			result in property damage.

IMPORTANT SAFETY INSTRUCTIONS

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known (to the State of

California) to cause cancer, birth defects or other reproductive harm. Some example of these chemicals are:

•lead from lead-based paints

•crystalline silica from bricks and cement and other masonry products

•arsenic and chromium from chemically-treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, always wear MSHA/NIOSH approved, properly fitting face mask or respirator when using such tools.

When using air tools, basic safety precautions should always be followed to reduce the risk of personal injury.

3- ENG A14083