KNOW YOUR BLOWER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR BLOWER ATTACHMENT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
Hanger
Shaft
Air intake Opening
Blower Discharge
Opening
OPERATING THE COUPLER
Your powerhead is equipped with a coupler which enables optional attach- ments to be installed. The optional at- tachments are:
Edger .............
Cultivator ..........
Pruner ............
Brushcutter* .......
*not designed for use with electric powerheads
WARNING: Always disconnect
powerhead spark plug (or disconnect powerhead from power source) before removing or installing attachments.
REMOVING ATTACHMENT
CAUTION: When removing or instal- ling attachments, place the unit on a flat surface for stability.
1.Loosen the coupler by turning the knob counterclockwise.
Upper Shaft
Coupler
LOOSEN
Lower
Attachment
TIGHTENKnob
2.Press and hold the locking/release button.
Locking/Release Button
Upper Shaft
Lower Attachment
3.While securely holding the upper shaft, pull the attachment straight out of the coupler.