SWITCH
See Figure 2.
To turn your light on and off, depress switch trigger.
SWITCH
TRIGGER
MULTI-POSITION
HEAD
Fig. 2
See Figure 2.
Your worklight has the feature of a
SAFETY RULES FOR WORKUGHTS
WARNING: Do not operate flashlight or charger near flammable liquids or in gaseous or explosive
atmospheres. Internal sparks may ignite fumes.
WARNING: Lens and bulb become hot during use:
•During or immediately after use, don'tlay worklight flat on lens surface.
•Handle worklight with care around any flammable surface.
•If bulb has been lit, let worklight cool for several minutes before changing bulb.
•Do not use or permit use of worklight in bed or sleeping bags. A burn injury could result.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
USA
BULB REPLACEMENT
See Figure 3.
When purchasing replacement xenon bulb, request
recommended part number
TO REPLACE BULB:
•Remove battery pack from workiight.
•Remove the two screws securing lens cover, then remove cover.
•Remove old bulb from spring.
•Position new xenon bulb in spring.
•Replace lens cover and screws.
•Replace battery pack.
Note: For your convenience, a bulb storage area with extra bulb has been provided. It is located behind the lens cover. See Figure 3.
SCREWS
BULB
BULB
STORAGE
AREA
LENSCOVER | Fig. 3 |
To preserve natural resources, please recycle or dispose of properly.
This product contains nickel- cadmium batteries. Local, state or federal laws may prohibit disposal of
Consult your local waste authority for information regarding available recycling and/or disposal options.
For replacement parts information and ordering, call this toll free number:
