Manuals / Craftsman / Lawn and Garden / Chipper

Craftsman 79960 manual Operation, PRE-STARTING Procedures, Safetyinterlock System, To Add Gasoline

Models: 987.799601 79960

1 44
Download 44 pages 42.32 Kb
Page 19
Image 19

OPERATION

To Add Gasoline

1, Stop the engine and wait for all moving parts to come to a complete stop. Disconnect the spark plug wire and secure it away from the spark plug, Allow

the engine and muffler to cool for at least three minutes,

2.Clean area around fuel fill cap and remove cap (A in Figure 19) from fuel tank_

3.Use a clean funnel to fill the fuel tank to 1/2 inch below the bottom of the filler neck (to provide room for fuel expansion).

4.Re-install the fuel fitl cap securely and wipe up any spilled gasoline.

PRE-STARTING PROCEDURES

IMPORTANT; REVIEW THE SAFETY SECTION AND READ THIS SECTION IN ITS ENTIRETY BEFORE STARTING THE ENGINE,

With the spark plug wire disconnected from the spark plug, perform the following pre-starting procedures as required before each start-up:

[] Place the machine outdoors on level ground_

[] Make sure you are wearing safety goggles (and heavy work gloves if using the chipper),

[] Be sure that all bystanders are at least 25 feet away from the area of operation,

[] Check that the chipper chute, vacuum inlet, or discharge deflector are empty (after initial use of the machine).

QCheck that all screws, nuts, bolts, and other fasteners are properly secured_

O Check the oi! level in the engine

QRe-attach the spark plug wire before starting the engine,,

Figure 19: Fill fuel tank.

DANGER

To Prevent PersonalInjury or Property Damage:

,,Cutting blades begin to rotate when the engine starts and slow down gradually after the engine is shut off. Do not allow hands or any other part of the

body or clothing inside the vacuum inlet, chipper chute, discharge opening, blower deflector opening, or near any moving part.

,,Do not run the engine in an enclosed area° Engine exhaust contains carbon monoxide gas, a deadly poison that is odorless, colorless and tasteless. Do not operate this equipment near buildings, windows, or air conditioners.

SAFETYINTERLOCK SYSTEM

Your machine is equipped with a Safety Interlock System which prevents the engine from starting unless the collection bag (or blower deflector) is installed. The rod (A, Figure 20) must be positioned as shown in slot (B) in order to start the engine..

The system also stops the engine if the operator attempts to remove the bag or blower deflector while the engine is running When the rod is not in place, a circuit doses to ground out the engine

If the safety interlock system fails, shut off the engine and do not operate the machine until the system has been repaired, Contact your local Sears service center for repairs,

WARNING

To avoid personal injury or propertydamage, do not operale this machine unless the safety interlock system is functioningproperly°

B

Figure 20: Safety Interlock System.

19

Page 18 Page 20
Page 19
Image 19
Craftsman 987.799601 manual Operation, PRE-STARTING Procedures, Safetyinterlock System, To Add Gasoline
Page 18 Page 20

987.799601, 79960 specifications

The Craftsman 79960,987.799601 is a power tool that embodies the philosophy of innovation combined with user-friendly design. Created for both amateur and professional users, this tool stands out in the marketplace due to its unique blend of versatility, power, and comfort.

At the heart of the Craftsman 79960 is a robust motor that delivers exceptional performance across various tasks. With a peak horsepower that allows for greater efficiency and productivity, users can tackle everything from woodworking and metalworking to home repairs with ease. Whether you are making precision cuts or performing heavy-duty drilling, this tool is equipped to handle it all.

One of the main features of the Craftsman 79960 is its lightweight and ergonomic design. The handle is thoughtfully crafted to provide a comfortable grip, reducing user fatigue during extended use. This is especially beneficial for professionals who require hours of continuous operation. Furthermore, its balanced weight distribution ensures optimal control and stability, contributing to superior performance.

The Craftsman 79960 also integrates advanced technology that sets it apart from its competitors. The inclusion of variable speed settings allows users to adjust the tool’s performance based on the task at hand. This feature is particularly useful for projects that require different levels of power and precision, making it suitable for delicate tasks as well as more robust applications.

In addition to its functionality, safety is a key consideration in its design. The Craftsman 79960 is equipped with an array of safety features, including an automatic shut-off function that activates in the event of overheating or abnormal operation. This offers peace of mind for users, allowing them to focus on their work without worrying about potential mishaps.

Durability is another highlight of the Craftsman 79960. Constructed with high-quality materials, this tool is built to withstand the rigors of daily use, ensuring longevity and reliability. Coupled with Craftsman's renowned warranty and support, users can rest assured that they are investing in a product designed to endure.

In summary, the Craftsman 79960,987.799601 is a powerful, versatile, and extremely user-friendly tool that caters to various needs. Its combination of powerful performance, advanced technology, ergonomic design, and safety features make it an exceptional choice for anyone looking to enhance their tool collection. Whether you're a hobbyist or a professional tradesperson, this tool is sure to meet and exceed your expectations.