Safety Information

!WARNING

Follow all safety precautions outlined in these operating instruc- tions. Improper use of this tool can cause severe injury or death from fire, electrical shock, or firing nail into body.

Before Operating Tool

1.Read and understand these operating instructions before operating tool.

2.Only well-instructed adults should operate tool. Never allow children to operate tool.

3.Do not operate tool

where highly flammable liquids or gases are present

while under the influence of alcohol, medication, or drugs

if exposed to rain or in damp or wet areas

while tired or in a hurry

if tool is damaged

if trigger does not turn tool on and off. Have faulty switch replaced by factory service center.

4.Make sure tool is grounded while in use. This will protect the operator from electrical shock. This tool has a three-wire cord and a three-prong, grounded plug. Only connect tool to a three-prong, grounded outlet. The green (or green and yellow) wire in the cord is the grounding wire. Never connect the grounding wire to a live terminal. If you have a two-prong outlet, use an adapter (see Figure 1). Attach the green-colored lug (extending from the adapter) to a permanent ground. You can attach lug to a properly grounded outlet box with a metal screw (see Figure 1).

Cover of

Grounded

Outlet Box

 

Adapter

 

Metal

Grounding

Screw

Pin

 

Green Colored Lug

(Grounding Means)

Figure 1

5.Use only three-prong, grounded extension cords marked for outdoor use.

6.Never use this tool

where heavy-duty tool is needed

where not intended - for example - don’t use tool on concrete, metal, or glass

7.Wear snug-fitting clothing when operating tool. Do not wear loose clothing or jewelry. They can get caught in moving parts.

8.Wear the following safety gear when operating tool.

rubber gloves and footwear with non-skid soles (outdoors)

eye protection conforming to CSA regulations. Make sure anyone in the vicinity of tool wears eye protection.

hair covering to contain long hair

2

Page 2
Image 2
Craftsman C583-930360 operating instructions Safety Information