Extension Cords
!CAUTION
Use only
Be sure to use the right size extension cord. If cord size is wrong, tool may be damaged. Tool performance may also be affected. Use only a three- prong, grounded extension cord.
Extension Cord Size Requirement 1 to 12 feet, use 16 AWG rated cord 12 to 50 feet, use 14 AWG rated cord
Inspect extension cord often. Replace cord if worn or damaged.
Loading Tool
!WARNING
Never load tool while it is plugged in. Accidental discharge may occur. Before loading, move trigger lock to the OFF position and unplug tool.
1.Move trigger lock to the OFF position. See PRODUCT IDENTIFICA- TION on page 4 to locate trigger lock.
2.Unplug tool.
3.Remove nail pusher from nail chamber. Access nail pusher at rear of nail chamber. Push end of nail pusher in and down to release it (see Figure 2). Pull nail pusher from nail chamber (See Figure 3).
1 |
|
2 | Nail Pusher |
Nail Pusher | Figure 3 |
|
Figure 2
5
