flamesfromwaterheaters,electric
motorsswitches,furnaces,etc.
• Storeattachmentsobladecannotac- cidentallycauseinjury.
• Storeattachmentindoors,outofreach ofchildren.
Ifsituationsoccurwhicharenotcov- eredinthismanual,usecareand goodjudgmentIfyouneedassis.- tance,contactyourSearsService Centre.
SPECIALNOTICE:Exposuretovibra- tionsthroughprolongeduseofgasoline poweredhandtoolscouldcauseblood vesselornervedamageinthefingers, hands,andjointsofpeoplepronetocir-
CARTON CONTENTS
Check carton contents against the fol- lowing list.
Model 0944.514610
•Pruner attachment
•Shoulder strap
•Upper shoulder strap clamp
•Lower shoulder strap clamp (with spacer tabs)
•Shoulder strap clamp screws (2)
•Attachment hanger
•Bar sheath
•Chain adjustment tool (bar tool)
•Hex wrench
•Bar and chain oil
Examine parts for damage. Do not use damaged parts.
NOTE: If you need assistance, or find parts missing or damaged, contact your Sears Service Centre.
ASSEMBLY
_WARNING: | If received as- |
culationdisordersabnormalswell- ingsProlongeduseincoldweatherhas. beenlinkedtobloodvesseldamagein otherwisehealthypeopleIfsymptoms. occursuchasnumbness,pain,lossof strength,changeinskincolorortexture, orlossoffeelingthefingers,hands, orjoints,discontinuetheuseofthistool andseekmedicalattentionAnanti.- vibrationsystemdoesnotguaranteethe avoidanceoftheseproblemsUsers. whooperatepowertoolsonacontinual andregularbasismustmonitorclosely theirphysicalconditionandthecondi- tionofthisunit.
SAVE THESE INSTRUCTIONS
1.Loosen the coupler by turning the knob counterclockwise.
Coupler
LOOSEN
TIGHTEN Knob
2.Remove the shaft cap from the pruner attachment (if present).
3.Position locking/release button of attachment into guide recess of coupler.
4.Push the attachment into the cou- pler until the locking/release button snaps into the primary hole.
5.Before using the unit, tighten the
knob securely by turning clock- wise.
Coupler Primary Hole
\ // Guide Recess
sembled, repeat all steps to ensure
your unit is properly assembled and all fasteners are secure.
TOOLS REQUIRED
•Hex wrench (provided)
INSTALLING PRUNER ATTACH-
MENT
CAUTION: When removing or instal- ling attachments, place the unit on a flat surface for stability.
PP Release Lower
ShaftAttachment
Button
_WARNING: | Make sure the lock- |
ing/release button is locked in the pri- mary hole and the knob is securely tightened before operating the unit.