Crate & Barrel Abbott Media-Gaming Tower screws, back panel, with, Attach, Fit dowels of, Fit dowels of, and secure with, and secure each with, into corresponding holes of

ABBOTT MEDIA GAMING TOWER

NOTE: Do not over tighten the bolts

right side panel

fixed shelf

left side	bottom
panel
	panel

1Fit dowels of left and right side panels into corresponding holes of fixed shelf and bottom panel and secure each with 4 bolts as shown. Secure, but do not over tighten, the bolts with a phillips head screwdriver.

top panel

2Fit dowels of left and right side panels into corresponding holes of top panel and secure with 4 bolts as shown, using a screwdriver.

NOTE: Do not over tighten the screws

back panel

4With the assistance of another adult, position assembled unit upright as shown. Attach back panel with

12screws, using a screwdriver. Do not over tighten the screws.

door front

5Attach 2 hinges to door front with 2 screws per hinge as shown, using a screwdriver.

Made in China - r06 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 2 of 4