ABBOTT MEDIA GAMING TOWER
Refer to Hinge Adjustment diagram for adjusting the alignment of the door hinges
A 
B
A
B
NOTE: Door can be attached to either side of assembled unit. Pilot holes on both sides.
door front
HINGE ADJUSTMENTS
If the doors do not appear aligned, refer to the instructions below:
1)Side to side adjustment:
Loosen screw A, adjust gap
with screw B and re-tighten A screw A.
1
B
2) Depth adjustment: |
| |
Loosen screw A, push hinge | A | |
arm forwards or backwards, | ||
| ||
| 2 | |
screw B. | ||
|
6A) Attach 2 hinge plates to assembled unit as shown. Secure each hinge plate with 4 screws.
B) Detach hinge bolts in hinge plates using a screwdriver. Fit hinges of door front into corresponding hinge plates of assembled unit as shown. Secure each hinge with 1 hinge bolt.
B
shelf pin
large shelf
A
large shelf
B
small shelf
7A) Insert 8 shelf pins at desired shelf heights. Place
2large shelves into assembly as shown.
B) Place 1 small shelf into assembly as shown. Insert 4 shelf pins at desired shelf height. Make sure each shelf is securely supported by shelf pins.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
Made in China - r06 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 3 of 4 |