Crate & Barrel Brighton Storage Bench back frame, spring washers, flat washers, front frame, 2spring washers, and 2 flat washers per side panel

BRIGHTON STORAGE BENCH

NOTE: Make sure notched corner of each partition are assembled on the same side

left		bottom
partition
		panel
	right
	partition	NOTE: Make
		sure ledge of
		each partition
		faces outward

1Fit dowels of left and right partitions into corresponding holes of bottom panel as shown. When assembling partitions, make sure the ledges face outwards and notched corners are on the same side. Secure bottom panel with 4 bolts, 4 spring washers and 4 flat washers, using a phillips head screwdriver. Do not over tighten the bolts.

NOTE: Do not	left side
	panel
over tighten
the bolts

right side panel

bottom panel

2Fit left and right side panels onto bottom panel of assembled unit as shown. Secure side panels with 4 bolts, 4 spring washers and 4 flat washers as shown.

side panel

front frame

back frame

front frame

back frame

3With the assistance of another adult, fit dowels of assembled unit into corresponding holes of back frame as shown. Secure assembly with 2 bolts, 2 spring washers, and 2 flat washers per side panel.

4Fit dowels of assembled unit into corresponding holes of front frame as shown. Secure front frame with 2 bolts,

2spring washers, and 2 flat washers per side panel.

Made in Vietnam - r04 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 2 of 3