
BRIGHTON STORAGE BENCH
top panel
A shelf
support
A
5With the assistance of another adult, carefully position unit upright. Fit dowels of assembled unit into corresponding holes of top panel as shown. Secure top panel with 14 bolts,
14spring washers and 14 flat washers.
adjustable shelf
adjustable B notched shelf
6A) Insert 12 shelf supports at desired shelf heights as shown.
B) Place 1 adjustable shelf and 2 adjustable notched shelves into assembled unit. Make sure each shelf is securely supported by each shelf support.
right door
left door
7Insert top edge of right door into top groove of unit as shown. At this point, align bottom edge of door into bottom groove of unit. Fit door into place. Repeat steps for left door.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
Made in Vietnam - r04 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 3 of 3 |