BUNGALOW TALL BOOKCASE
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.
F
wall strap
C metalanchor
D
large screw
A
wall bracket & small screw
WALL MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.
A)Attach 1 wall bracket to assembled unit as shown, using 1 small screw.
B)Determine the final location of dresser unit. Mark position on the wall, approximately 2" below the bracket mounted to the back of the unit.
C)Drill a pilot hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the anchor. Insert metal anchor into hole and secure using a phillips screwdriver.
D)Attach the wall bracket to the wall by inserting 1 large screw through the wall bracket and into the metal anchor in the wall.
E)Place the unit so the wall bracket on the back edge is aligned with the wall bracket on wall.
F)Lace one end of the wall strap through both brackets, and into the other end of the strap.
G)Pull the strap tightly until secure.
Wall mounting assembly is now complete.
Made in China - r08 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 4 of 4 |