BUNGALOW TALL BOOKCASE
NOTE: Do not over tighten bolts.
right side panel
B
long bolt
flat washer
1A) Place bottom panel and left and right side panels on a clean, padded surface as shown. Insert 9 wood dowels as shown.
B) Attach left and right side panels to bottom panel with 2 feet, 2 long bolts and 2 flat washers per side panel frame. Secure, but do not over tighten, bolts with an allen wrench.
C) Attah center support to bottom panel with 1 long bolt and 1 flat washer.
left side |
|
panel | center |
| support |
A
A
B | C |
C |
|
bottom panel
foot
2 A) Attach 1 small partition to bottom panel of assembled unit with 2 short bolts and 2 flat washers as shown. Secure, but do not fully tighten, bolts with an allen wrench.
B) Attach 1 fixed shelf to assembled unit with 6 medium bolts and 6 flat washers as shown.
Repeat steps A and B for remaining partitions and fixed shelves.
fixed shelf
B | A |
medium bolt | short bolt |
flat washer | flat washer |
|
NOTE: Do not fully tighten bolts
B
A
small partition
Made in China - r08 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 2 of 4 |