Crate & Barrel Cole Six-Drawer Dresser cams, cams, partition, back panel, left and right side panels, 3Insert 5 cams and 7 wood dowels into partition as shown

COLE SIX DRAWER DRESSER

NOTE: Make sure	side
arrows on each cam	A panel
points toward nearest
edge with holes

B

back panel

1A) Insert 4 wood dowels, 3 cam screws, and 2 cams into left and right side panels as shown. Secure cam screws with a phillips head screwdriver. Make sure arrows on each cam points toward nearest edge with holes.

B) Insert 14 cams, 3 cam screws and 14 wood dowels into back panel as shown.

left side panel

right side

panel back

panel

2Fit dowels of back panel into corresponding holes of left and right side panels as shown. With a screwdriver, turn cams clockwise until it securely engages each cam screw.

partition

partition

3Insert 5 cams and 7 wood dowels into partition as shown.

4Fit dowels of partition into corresponding holes of assembled unit as shown. Secure 3 cams.

Made in China - r05 Customer Service 800.967.6696 www.crateandbarrel.com Page 2 of 5