Crate & Barrel Cole Six-Drawer Dresser CLEANING AND CARE, drawer back, small screws, center support, Repeat steps 11-14for remaining 5 drawer assemblies

COLE SIX DRAWER DRESSER

drawer back

13Slide drawer back into corresponding grooves of drawer assembly as shown.

drawer assembly

14Place drawer assembly upside down onto a clean, padded surface as shown. Secure drawer bottom of drawer assembly with 2 small screws as shown, using a screwdriver.

Repeat steps 11-14 for remaining 5 drawer assemblies.

A assemblydrawer	CLEANING AND CARE
	Clean surfaces with a dry or damp soft cloth. Do not use
center	abrasive cleaners. Do not use furniture wax or polish as the
	wood is finished with a protective clear lacquer.
B support
adjustment

15A) With the assistance of another adult, position unit upright as shown. Fit drawer glide wheels over wheels on the cabinet glides and push in while lifting slightly.

B) Adjust floor glide on center support leg until it hits the floor.

Assembly is now complete.

Made in China - r05 Customer Service 800.967.6696 www.crateandbarrel.com Page 5 of 5