DRAKE MEDIA STAND
media stand assembly
crossbar
crossbar | right leg |
| |
A |
|
B |
|
left leg |
|
NOTE: Make sure brackets of legs face in as shown
right leg
A
B
left leg
NOTE: Do not over tighten the bolts
2A) With the assistance of another adult, fit dowels of left and right leg into corresponding holes of media stand assembly as shown.
B) Fit dowels of left and right leg into corresponding holes of crossbars. With a screwdriver, turn cams
clockwise until they securely engage each cam screw.
3A) Fit dowels of left and right leg into corresponding holes of assembled unit. Secure all cams.
B) Secure left and right legs of assembled unit with 4 large bolts, 4 spring washers and 4 flat washers as shown, using an allen wrench. Do not over tighten the bolts.
B
tabletop | adjustable |
assembly | |
| leg |
| leveler |
| B |
glass tabletop
A
pad | B |
|
A
adjustable leg
4A) Attach adjustable leg to assembled unit by turning leg clockwise to secure. If your table is not level after assembly is complete, with the assistance of another adult, adjust leveler of adjustable leg as neccessary.
B) Attach tabletop frame to assembled unit with 4 medium bolts as shown, using an allen wrench.
INSTRUCTION FOR REMOVING DOOR:
INSTRUCTION FOR INSERTING DOOR:
A | pull |
|
5A) With the assistance of another adult, position unit upright. Attach 2 pulls to assembled unit as shown and secure each pull with 2 small bolts.
B) Adhere 6 pads to tabletop frame as shown and carefully place glass tabletop onto tabletop frame.
Assembly is now complete.
Lift door and release from bottom groove.
Insert door into top groove and fit into bottom groove.
Made in China - r06 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 2 of 3 |