Crate & Barrel Drake 49 Media Console OPTIONAL WALL MOUNTING INSTRUCTIONS, CLEANING AND CARE, Attach the, wall strap, small screw, large screw, wall bracket, wall bracket, plastic anchor

DRAKE MEDIA STAND

F C

D

A

OPTIONAL WALL MOUNTING INSTRUCTIONS

For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.

A)Attach 1 wall bracket to assembled unit as shown, using 1 small screw.

B)Determine the final location of dresser unit. Mark position on the wall, approximately 2" below the bracket mounted to the back of the unit.

C)Drill a pilot hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the anchor. Insert plastic anchor into hole and secure using a phillips screwdriver.

D)Attach the wall bracket to the wall by inserting 1 large screw through the wall bracket and into the plastic anchor in the wall.

E)Place the unit so the wall bracket on the back edge is aligned with the wall bracket on wall.

F)Lace one end of the wall strap through both brackets, and into the other end of the strap.

G)Pull the strap tightly until secure.Wall mounting assembly is now complete.

WALL

NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.

Made in China - r06 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 3 of 3