DRAKE MEDIA STAND
HARDWARE
Thank you for purchasing the Drake Media Stand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
| 4 - small | 4 - medium | 8 - large | 8 - wood | 4 - cam |
| bolts | bolts | bolts | dowels | screws |
Missing hardware? Please call 800.606.6387 for replacements.
WALL MOUNTING HARDWARE
| 1 - wall strap 1 - small | 1 - large | 2 - wall | 1 - plastic |
| screw | screw | brackets | anchor |
TOOLS REQUIRED |
|
|
|
| allen wrench | phillips head screwdriver | ||
( We recommend the use of hand tools instead of power tools )
COMPONENTS
| 1 - media stand | 1 - tabletop |
| assembly | frame |
| 2 - crossbars | 2 - left legs | 2 - right legs |
ASSEMBLY
NOTE: Do not over tighten the cam screws
A | A |
left leg | right leg |
|
Make sure arrows on each cam point toward nearest edge with holes
B
crossbar
1A) Insert 2 wood dowels and 1 cam screw into left and right legs as shown. Secure, but do not over tighten, using a phillips head screwdriver.
B) Insert 2 cams into each crossbar as shown. Make sure arrows on each cam point toward the nearest edge with holes.
Made in China - r06 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 1 of 3 |