Crate & Barrel Elements Large Media Cart cams, top panel, cam screws, wide upright, wire support, wide uprights, narrow uprights

ELEMENTS MEDIA CART

Wide Upright

2Insert 6 cams into each wide upright as shown. Make sure that the arrow on each cam points towards the closest edge.

Top panel (upside down)

3Attach 6 cam screws to the underside of the top panel with a phillips head screwdriver. Do not over tighten screws.

A

B

4A. Fit 2 wide uprights and into position, aligning dowels and cam screws with corresponding holes in top panel. Make sure the cams on the wide uprights face inward.

B. At this point decide the location of the center support. Center support can be installed centered or left or right of center. Insert 1 wire support into holes corresponding with the desired location of the center support.

5Fit 4 narrow uprights into position, aligning dowels with corresponding holes in top panel.

Made in China - r08 Customer Service 800.967.6696 www.crateandbarrel.com

Page 2 of 4