Crate & Barrel Elements Large Media Cart cams, cams, cam screws, cam screws, screwdriver, center panel, center panel, wire support, bottom panel, wire supports, phillips head screwdriver

ELEMENTS MEDIA CART

Cam in	Cam in
unlocked	locked
position	position

6Secure both wide uprights to top panel by locking all 6 lower cams with a phillips head screwdriver. Turn all cams clockwise as illustrated until cam firmly engages the cam screw.

A B

Center panel (upside down)

7A. Insert 12 cam screws into the top and bottom of the center panel as indicated.

B. Insert 2 wire supports at desired location on top and bottom of center panel. Make sure wire supports are aligned with one another.

8Fit 2 wide uprights and 4 narrow uprights into position. Secure cams on each wide upright above and below the center panel with a screwdriver.

B

A

9A. Attach 6 cam screws and 1 wire support to top side of bottom panel.

B. Align cam screws with corresponding holes and dowels in the assembly and fit bottom panel into position. Fully tighten 6 cams with a screwdriver to secure the assembly.

Made in China - r08 Customer Service 800.967.6696 www.crateandbarrel.com

Page 3 of 4