FARROW 44” CORNER MEDIA CONSOLE
SAFETY MOUNTING INSTRUCTIONS:
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.
A)Attach 2 wall brackets to back of unit using 4 small screws as shown.B)Determine the final location of unit. Mark position on the wall, approximately 2" below each wall bracket mounted to the back of the unit.
C)Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall.
D)Attach wall brackets to the wall by inserting 2 large screws through each bracket and each plastic anchor in the wall.
E)Place the unit so the wall brackets on the back edge are aligned with the wall brackets on the wall.
F)Lace one end of the wall straps through each bracket, and into the other end of the strap.
| G) Pull the strap tightly until secure. | WALL | |
| Wall mounting assembly is now complete. | ||
|
If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.
| F |
| wall |
| strap |
C anchorplastic | wall |
wall | bracket |
| |
bracket |
|
D largescrew
A smallscrew
Made in Vietnam - r03 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 4 of 4 |